Use 300-710 Exam Dumps (2024 PDF Dumps) To Have Reliable 300-710 Test Engine
300-710 PDF Recently Updated Questions Dumps to Improve Exam Score
The Securing Networks with Cisco Firepower certification exam consists of 60-70 multiple-choice and multiple-answer questions, and candidates have 90 minutes to complete the exam. 300-710 exam tests the candidates' knowledge of Cisco Firepower NGFW concepts, architecture, deployment, and management, as well as their ability to configure and troubleshoot Cisco Firepower NGFW features such as access control, intrusion prevention, network analysis, and malware protection. Candidates who pass the exam will earn the Cisco Certified Network Professional Security (CCNP Security) certification, which is a globally recognized credential that demonstrates their expertise in securing Cisco networks using advanced security technologies.
NEW QUESTION # 66
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- B. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
- C. reputation-based objects, such as URL categories
- D. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- E. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
Answer: D,E
NEW QUESTION # 67
Which group within Cisco does the Threat Response team use for threat analysis and research?
- A. Cisco Talos
- B. OpenDNS Group
- C. Cisco Deep Analytics
- D. Cisco Network Response
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/products/security/threat-response.html#~benefits
NEW QUESTION # 68
Which two routing options are valid with Cisco FTD? (Choose Two)
- A. ECMP with up to three equal cost paths across multiple interfaces
- B. BGPv6
- C. ECMP with up to three equal cost paths across a single interface
- D. BGPv4 in transparent firewall mode
- E. BGPv4 with nonstop forwarding
Answer: B,C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION # 69
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. It is routed back to the Cisco ASA interfaces for transmission.
- B. The packets are duplicated and a copy is sent to the destination.
- C. It is retransmitted from the Cisco IPS inline set.
- D. It is transmitted out of the Cisco IPS outside interface.
Answer: A
NEW QUESTION # 70
An administrator is attempting to remotely log into a switch in the data centre using SSH and is unable to connect. How does the administrator confirm that traffic is reaching the firewall?
- A. by attempting to access it from a different workstation.
- B. by performing a packet capture on the firewall.
- C. by running Wireshark on the administrator's PC
- D. by running a packet tracer on the firewall.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.html#anc16
NEW QUESTION # 71
An organization is migrating their Cisco ASA devices running in multicontext mode to Cisco FTD devices. Which action must be taken to ensure that each context on the Cisco ASA is logically separated in the Cisco FTD devices?
- A. Add the Cisco FTD device to the Cisco ASA port channels.
- B. Add a native instance to distribute traffic to each Cisco FTD context.
- C. Configure the Cisco FTD to use port channels spanning multiple networks.
- D. Configure a container instance in the Cisco FTD for each context in the Cisco ASA.
Answer: A
NEW QUESTION # 72
An engineer is troubleshooting HTTP traffic to a web server using the packet capture tool on Cisco FMC. When reviewing the captures, the engineer notices that there are a lot of packets that are not sourced from or destined to the web server being captured. How can the engineer reduce the strain of capturing packets for irrelevant traffic on the Cisco FTD device?
- A. Use an access-list within the packet capture to permit only HTTP traffic to and from the web server.
- B. Use the host filter in the packet capture to capture traffic to or from a specific host.
- C. Use the -c option to restrict the packet capture to only the first 100 packets.
- D. Redirect the packet capture output to a .pcap file that can be opened with Wireshark.
Answer: B
NEW QUESTION # 73
Which firewall design will allow It to forward traffic at layers 2 and 3 for the same subnet?
- A. routed mode
- B. Integrated routing and bridging
- C. transparent mode
- D. Cisco Firepower Threat Defense mode
Answer: B
Explanation:
Integrated routing and bridging (IRB) is a feature of Cisco Firepower Threat Defense (FTD) that allows the firewall to forward traffic at both layers 2 and 3 for the same subnet. In this mode, the firewall can act as a switch or a bridge to forward traffic at layer 2 and as a router to forward traffic at layer 3. This allows the firewall to maintain full control over the traffic, while still allowing it to forward traffic at both layers.
https://www.cisco.com/c/en/us/td/docs/security/firepower/ftd-config-guide/FTD-Config-Guide-v6/Integrated-Routing-and-Bridging.html
NEW QUESTION # 74
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. virtual links
- B. MD5 authentication to OSPF packets
- C. SHA authentication to OSPF packets
- D. area boundary router type 1 LSA filtering
- E. OSPFv2 with IPv6 capabilities
Answer: A,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION # 75
An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?
- A. The administrator is adding interfaces of multiple types.
- B. The administrator is adding an interface that is in multiple zones.
- C. The interfaces are being used for NAT for multiple networks.
- D. The interfaces belong to multiple interface groups.
Answer: D
NEW QUESTION # 76
Which feature within the Cisco FMC web interface allows for detecting, analyzing and blocking malware in network traffic?
- A. Cisco AMP for Networks
- B. Cisco AMP for Endpoints
- C. file policies
- D. intrusion and file events
Answer: A
NEW QUESTION # 77
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 78
Refer to the exhibit.
A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?
- A. Create an access control policy rule that allows ICMP traffic.
- B. Configure a custom Snort signature to allow ICMP traffic after Inspection.
- C. Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.
- D. Modify the Snort rules to allow ICMP traffic.
Answer: A
NEW QUESTION # 79
An organization is setting up two new Cisco FTD devices to replace their current firewalls and cannot have any network downtime During the setup process, the synchronization between the two devices is failing What action is needed to resolve this issue?
- A. Confirm that both devices have the same port-channel numbering
- B. Confirm that both devices have the same flash memory sizes
- C. Confirm that both devices are running the same software version
- D. Confirm that both devices are configured with the same types of interfaces
Answer: C
NEW QUESTION # 80
An analyst using the security analyst account permissions is trying to view the Correlations Events Widget but is not able to access it. However, other dashboards are accessible. Why is this occurring?
- A. An API restriction within the Cisco FMC is preventing the widget from displaying.
- B. The widget is not configured within the Cisco FMC.
- C. The widget is configured to display only when active events are present.
- D. The security analyst role does not have permission to view this widget.
Answer: B
NEW QUESTION # 81
When using Cisco Threat Response, which phase of the Intelligence Cycle publishes the results of the investigation?
- A. dissemination
- B. analysis
- C. processing
- D. direction
Answer: A
Explanation:
Disseminate: The dissemination phase publishes the results of the investigation or threat hunt. This information is disseminated with a focus on the receivers of the information. At the tactical level, this information feeds back into the beginning of the F3EAD model, Find. Figure 3 illustrates the F3EAD model.
NEW QUESTION # 82
A security engineer found a suspicious file from an employee email address and is trying to upload it for analysis, however the upload is failing. The last registration status is still active. What is the cause for this issue?
- A. Cisco AMP for Networks is unable to contact Cisco Threat Grid Cloud.
- B. Cisco AMP for Networks is unable to contact Cisco Threat Grid on premise.
- C. The user agent status is set to monitor.
- D. There is a host limit set.
Answer: A
NEW QUESTION # 83
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?
- A. Use passive IDS ports for both departments
- B. Use a dedicated IPS inline set for each department to maintain traffic separation
- C. Use one pair of inline set in TAP mode for both departments
- D. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation
Answer: D
NEW QUESTION # 84
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be configured only for firewall routed mode.
- B. The units must be different models if they are part of the same series.
- C. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- D. The units must be the same model.
- E. The units must be the same version
Answer: D,E
NEW QUESTION # 85
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Monitor
- B. Allow with Warning
- C. Interactive Block
- D. Block
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/AC-Rules-Tuning-Overview.html#76698
NEW QUESTION # 86
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. DHCP pool disablement
- B. host shutdown
- C. dynamic null route configured
- D. quarantine
- E. port shutdown
Answer: D,E
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/210524-configure- firepower-6-1-pxgrid-remediati.html
NEW QUESTION # 87
Which interface type allows packets to be dropped?
- A. TAP
- B. ERSPAN
- C. inline
- D. passive
Answer: C
NEW QUESTION # 88
......
Cisco 300-710 exam, also known as Securing Networks with Cisco Firepower, is designed for IT professionals who want to enhance their skills and knowledge in network security. 300-710 exam is part of the Cisco Certified Network Professional Security (CCNP Security) certification track, which validates the skills required to secure Cisco networks. The Cisco 300-710 exam focuses on Cisco Firepower Threat Defense, an advanced security solution that provides comprehensive threat protection for organizations of all sizes.
Cisco 300-710 exam is a valuable certification for IT professionals who want to advance their careers in network security. It provides an excellent opportunity to demonstrate one's knowledge and skills in implementing and managing security policies using Cisco Firepower NGFW technologies. With this certification, IT professionals can enhance their credibility, expand their job opportunities, and earn higher salaries.
300-710 Dumps Full Questions with Free PDF Questions to Pass: https://www.realexamfree.com/300-710-real-exam-dumps.html
Free CCNP Security 300-710 Official Cert Guide PDF Download: https://drive.google.com/open?id=1gAElKljVlLQcR0mdtMWnn4_QS-PiSCeh
