Updated Jan 05, 2022 Verified 300-710 dumps Q&As - 100% Pass
New 2022 Latest Questions 300-710 Dumps - Use Updated Cisco Exam
NEW QUESTION 15
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?
- A. Deploy the firewall in routed mode with access control policies.
- B. Deploy the firewall in transparent mode with access control policies.
- C. Deploy the firewall in transparent mode with NAT configured.
- D. Deploy the firewall in routed mode with NAT configured.
Answer: A
NEW QUESTION 16
An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?
- A. reports
- B. dashboards
- C. context explorer
- D. event viewer
Answer: D
NEW QUESTION 17
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/system_configuration.html
NEW QUESTION 18
Which feature within the Cisco FMC web interface allows for detecting, analyzing and blocking malware in network traffic?
- A. Cisco AMP for Endpoints
- B. file policies
- C. Cisco AMP for Networks
- D. intrusion and file events
Answer: C
NEW QUESTION 19
An organization must be able to ingest NetFlow traffic from their Cisco FTD device to Cisco Stealthwatch for behavioral analysis. What must be configured on the Cisco FTD to meet this requirement?
- A. variable set object for NetFlow
- B. security intelligence object for NetFlow
- C. interface object to export NetFlow
- D. flexconfig object for NetFlow
Answer: D
NEW QUESTION 20
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-512
- B. SHA-4096
- C. SHA-256
- D. SHA-1024
Answer: C
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION 21
An engineer is configuring a cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces.
Which interface mode should be used to meet these requirements?
- A. routed
- B. passive
- C. transparent
- D. inline set
Answer: D
NEW QUESTION 22
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower gives recommendations to update the policies.
- C. Cisco Firepower automatically updates the policies.
- D. The administrator manually updates the policies.
Answer: B
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 23
With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. routed
- B. inline tap
- C. inline set
- D. passive
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/interface_overview_for_firepower_threat_defense.html
NEW QUESTION 24
In which two places can thresholding settings be configured? (Choose two.)
- A. per preprocessor, within the network analysis policy
- B. on each access control rule
- C. globally, per intrusion policy
- D. globally, within the network analysis policy
- E. on each IPS rule
Answer: C,E
NEW QUESTION 25
When do you need the file-size command option during troubleshooting with packet capture?
- A. when capture packets are restricted from the secondary memory
- B. when capture packets exceed 10 GB
- C. when capture packets exceed 32 MB
- D. when capture packets are less than 16 MB
Answer: C
NEW QUESTION 26
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?
- A. The rate-limiting rule is disabled.
- B. The system rate-limits all traffic.
- C. Matching traffic is not rate limited.
- D. The system repeatedly generates warnings.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/quality_of_service_qos.pdf
NEW QUESTION 27
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-tuning
- B. system support ssl-client-hello-display
- C. system support ssl-client-hello-force-reset
- D. system support ssl-client-hello-enabled
Answer: D
NEW QUESTION 28
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Connectivity Over Security
- B. Balanced Security and Connectivity
- C. Security Over Connectivity
- D. Maximum Detection
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusio
NEW QUESTION 29
An administrator is setting up Cisco Firepower to send data to the Cisco Stealthwatch appliances. The NetFlow_Set_Parameters object is already created, but NetFlow is not being sent to the flow collector. What must be done to prevent this from occurring?
- A. Create a service identifier to enable the NetFlow service
- B. Add the NetFlow_Add_Destination object to the configuration
- C. Add the NetFlow_Send_Destination object to the configuration
- D. Create a Security Intelligence object to send the data to Cisco Stealthwatch
Answer: D
NEW QUESTION 30
A network engineer wants to add a third-party threat feed into the Cisco FMC for enhanced threat detection Which action should be taken to accomplish this goal?
- A. Enable Rapid Threat Containment using REST APIs
- B. Enable Threat Intelligence Director using STIX and TAXII
- C. Enable Threat Intelligence Director using REST APIs
- D. Enable Rapid Threat Containment using STIX and TAXII
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION 31
Which two routing options are valid with Cisco FTD? (Choose Two)
- A. ECMP with up to three equal cost paths across a single interface
- B. BGPv4 in transparent firewall mode
- C. BGPv4 with nonstop forwarding
- D. BGPv6
- E. ECMP with up to three equal cost paths across multiple interfaces
Answer: A,C
NEW QUESTION 32
What are the minimum requirements to deploy a managed device inline?
- A. passive interface, MTU, and mode
- B. inline interfaces, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. passive interface, security zone, MTU, and mode
Answer: B
NEW QUESTION 33
Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?
- A. triage
- B. Windows domain controller
- C. audit
- D. protection
Answer: C
NEW QUESTION 34
A connectivity issue is occurring between a client and a server which are communicating through a Cisco Firepower device While troubleshooting, a network administrator sees that traffic is reaching the server, but the client is not getting a response Which step must be taken to resolve this issue without initiating traffic from the client?
- A. Use packet capture to ensure that traffic is not being blocked by an access list.
- B. Use packet capture to validate that the packet passes through the firewall and is NATed to the corrected IP address.
- C. Use packet-tracer to validate that the packet passes through the firewall and is NATed to the corrected IP address.
- D. Use packet-tracer to ensure that traffic is not being blocked by an access list.
Answer: C
NEW QUESTION 35
......
Exam Content
The content of the Cisco 300-710 test revolves around four domains, each containing specific knowledge and skills that the candidates must develop competency in. These areas have different percentage weights in the exam syllabus, which shows how many questions related to this or that topic will appear in the test. While preparing for your certification exam, you need to pay special attention to the sections with higher weight. However, you need to remember that only mastering all the topics will guarantee success in your test. The detailed outline of the domains covered in Cisco 300-710 is provided below.
- Deployment – 30%
Within this first topic, the examinees need to demonstrate that they have the relevant skills in implementing NGFW modes (including routed mode as well as transparent mode); implementing NGIPS modes (including passive & inline); implementing high availability options (including link redundancy, standby/active failover, multi-instance); describing IRB configurations.
- Configuration – 30%
This domain requires that the students have the expertise in a wide range of knowledge areas. For starters, they should have proficiency in configuring system settings within Cisco Firepower Management Center as well as configuring the policies, such as access control, malware & file, intrusion, identity, SSL, DNS, prefilter within Cisco Firepower Management Center. In addition, they need to able to customize the following features with the help of Cisco Firepower Management Center: network discovery, correlation, application detectors (Open AppID), and actions. This part also encompasses such skills as customizing objects with the help of Firepower Management Center (including object management as well as intrusion rules) and customizing devices with the help of Firepower Management Center (including device Management, VPN, NAT, QoS, Certificates, Platform Settings).
- Management & Troubleshooting – 25%
To tackle the questions associated with this subject area, the test takers should develop their competency in performing troubleshooting with the help of FMC CLI as well as GUI; customizing dashboards as well as reporting in FMC; troubleshooting with the help of packet capture actions; analyzing standard reports and risk.
- Integration – 15%
The last section in the Cisco 300-710 exam encompasses the individuals’ skills, such as customizing Cisco AMP for Networks within Firepower Management Center; configuring Cisco AMP for Endpoints within Firepower Management Center; implementing Threat Intelligence Director for third-party security intelligence feeds. Moreover, the learners should possess the expertise in describing the utilization of Cisco Threat Response for the needs of security investigations; describing Cisco FMC PxGrid Integration using Cisco Identify Services Engine (ISE); describing the functionality of Rapid Threat Containment (RTC) within Firepower Management Center.
Latest 300-710 Exam Dumps Cisco Exam from Training: https://www.realexamfree.com/300-710-real-exam-dumps.html
Pass Cisco 300-710 PDF Dumps Recently Updated 145 Questions: https://drive.google.com/open?id=115-HMNaRH614FAXutGV8siB4UO0Nf0KI
