Cisco 300-610 Practice Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass CCNP Data Center's 300-610 Exam
4. Automation Design
- Weightage allotted – 20%
This domain mostly aims to check one’s knowledge of the concepts like the evaluation of the options for network orchestration, compute orchestration, and automation. To answer all the related questions correctly, the candidates need to be familiar with DCNM, NX-API, Puppet, Intersight, Ansible, Python, vHBA and vNIC templates, and service profile templates, among the rest.
NEW QUESTION 19
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 20
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
- B. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- D. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
Answer: D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf
NEW QUESTION 21
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have access to its own VRF instance.
Which interface should be used to meet these requirements?
- A. management interface
- B. loopback interface
- C. physical interface
- D. interface VLAN
Answer: A
NEW QUESTION 22
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?
- A. Network
- B. Uplink
- C. server
- D. Appliance
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade-server-chassis/116075-ucs-app-connectivity-tshoot-00.html
NEW QUESTION 23
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 24
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. uses all available uplink bandwidth
- B. no spanning-tree blocked ports
- C. supports Layer 3 port channels
- D. disables spanning-tree
- E. maintains single control plane
Answer: A,B
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/ vpc_best_practices_design_guide.pdf
NEW QUESTION 25
Which technology enables Layer 2 extension between remote data center sites?
- A. FCIP
- B. GRE
- C. OTV
- D. DMVPN
Answer: C
NEW QUESTION 26
A customer wants to deploy a Layer 2 extension over a transport infrastructure for multiple data centers. The data center technology should support a localized Layer 3 gateway, a separate flooding domain, and STP isolation per data center. Which DCI technology meets these requirements?
- A. E-Line
- B. Pseudowire
- C. VXLAN EVPN
- D. E-LAN
Answer: C
NEW QUESTION 27
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 28
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 29
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and BSeries servers.
Which solution should be included to meet these requirements?
- A. Pin the IOM ports of the service profile to dedicated server ports.
- B. Pin the vNICs and vHBAs of the service profile to dedicated server ports.
- C. Pin the server ports of the service profile to dedicated uplink ports.
- D. Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.
Answer: C
NEW QUESTION 30
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 31
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPV mode
- B. NPIV mode
- C. FC end-host mode
- D. FC switching mode
Answer: D
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION 32
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 33
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Fabric Interconnect 6300
- B. HX220c
- C. UCS B200
- D. Gigabit Ethernet Switch
- E. HX240c
Answer: C,E
NEW QUESTION 34
......
Cisco 300-610 Pre-Exam Practice Tests | RealExamFree: https://www.realexamfree.com/300-610-real-exam-dumps.html
300-610 practice test questions, answers, explanations: https://drive.google.com/open?id=13TYyqIdKTFh2lbUnWiP46rcIUt0-CzK9
