2024 Updated Verified C-TS422-2023 Downloadable Printable Exam Dumps
The Ultimate SAP C-TS422-2023 Dumps PDF Review
SAP C-TS422-2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION # 17
How can you limit the validity of a bill of material (BOM)? Note: There are 2 correct answers to this question.
- A. By period
- B. By material status
- C. By material type
- D. By plant
Answer: A,D
NEW QUESTION # 18
What are the possible results of a production planning run in Advanced Planning (PP/DS)?
Note: There are 2 correct answers to this question.
- A. Planned order
- B. Purchase order
- C. Scheduling agreement schedule line
- D. Production order
Answer: A,C
NEW QUESTION # 19
What is the purpose of a reporting point confirmation in repetitive manufacturing?
Note: There are 2 Correct answers to this question?
- A. To provide timely updates of inventory management for the staged components
- B. To stage different components for a production line simultaneously
- C. To reduce the total production lead time for a long production line
- D. To determine the work in progress along the production line
Answer: A,D
Explanation:
A reporting point confirmation is a function that allows you to backflush the material components and activities that have been consumed and performed at a specific operation in a repetitive manufacturing process. It also reduces the dependent requirements for the planned orders. You can use reporting point confirmation for the following purposes:
To determine the work in progress (WIP) along the production line, by posting the quantity that is on the production line at each reporting point. This helps you to calculate the volume and value of unfinished products.
To provide timely updates of inventory management for the staged components, by recording the withdrawal of components at a time that is close to the time of the operation in which they are used. This helps you to avoid discrepancies between the actual and planned consumption of materials. Reference: Reporting Point Confirmation, Repetitive Manufacturing Confirmation
NEW QUESTION # 20
What are the possible results of a production planning run in Advanced Planning (PP/DS)? Note: There are 2 correct answers to this question.
- A. Planned order
- B. Purchase order
- C. Scheduling agreement schedule line
- D. Production order
Answer: A,C
NEW QUESTION # 21
What is a prerequisite for consumption of planned independent requirements to take place for planning strategy 40 (Planning with final assembly)?
- A. MRP creates a dependent requirement.
- B. A sales order is created.
- C. A sales order is delivered.
- D. MRP creates a planned order.
Answer: B
NEW QUESTION # 22
How would you define pegging in the context of Advanced Planning?
- A. An evaluation to identify overstock situations in the balance between the receipt the issue elements after the production planning run
- B. An evaluation that is ordered according to the network structure of all related products represents the coverage of issue elements with receipt elements stock
- C. An evaluation to identify material or capacity shortages in the billofmaterial structure after the production planning run
- D. An evaluation that is ordered according to the billofmaterial structure of all related products represents the relationship between the receipt the issue elements
Answer: D
NEW QUESTION # 23
What are the consequences when you assign a planned order to a production line manually, using the planning table in repetitive manufacturing?
- A. The planned order's components are copied to the picking list.
- B. The planned order is converted to a production order.
- C. The planned order generates capacity requirements
- D. The planned order's component availability is checked.
Answer: C
Explanation:
When you assign a planned order to a production line manually, using the planning table in repetitive manufacturing, the system generates capacity requirements for the planned order. The capacity requirements are calculated based on the production line, the quantity, and the production rate of the planned order. The system also checks the availability of the production line and displays any capacity overload or underload. The planned order is not converted to a production order, nor is the component availability or the picking list affected by the manual assignment. Reference: SAP Help Portal - Assigning Planned Orders to Production Lines, SAP S/4HANA Production Planning and Manufacturing Certification Guide - Chapter 7: Repetitive Manufacturing
NEW QUESTION # 24
What could be the reason for multiple commitments where several operations have the same scheduled dates on a work center after dispatching? Note: There are 2 correct answers to this question.
- A. The Change Planning Direction indicator is set in the strategy profile.
- B. Alternative work centers are fully occupied.
- C. The work center has several individual capacities.
- D. The Finite Scheduling indicator is NOT set in the strategy profile.
Answer: C,D
NEW QUESTION # 25
How can you limit the validity of a bill of material (BOM)? Note: There are 2 correct answers to this question,
- A. By Industry
- B. By Plant
- C. By Period
- D. By Material Status
Answer: B,C
Explanation:
You can limit the validity of a BOM by plant and by period. The plant determines the organizational area of validity for the BOM, and you can assign the same BOM to different or further plants if the prerequisites are met. The period of validity for a BOM is restricted by the valid-from date and the valid-to date in the BOM header and item, which determine when the BOM becomes effective and when it ends. Reference: Validity of Bills of Material, BOM Item Validity
NEW QUESTION # 26
Which materials have a negative quantity in a bill of material or in a recipe?
Note: There are 3 correct answers to this question
- A. Co-products
- B. By-products
- C. Continuous flow materials
- D. Waste products
- E. Bulk materials
Answer: A,B,D
Explanation:
Materials that have a negative quantity in a bill of material or in a recipe are those that are produced in addition to the main product during a production process. They are either sold or disposed of, and their costs are apportioned among the main product and the co-products. By-products are materials that have a low value compared to the main product and are usually not planned in advance. Co-products are materials that have a high value compared to the main product and are usually planned in advance. Waste products are materials that have no value and are discarded or recycled. Reference: Bill of Material (BOM), Test sap pp 2020 s4 hana - DAYPO
NEW QUESTION # 27
Where do you maintain the work center that represents the production line for repetitive manufacturing? Note: There are 2 correct answers to this question.
- A. Routing
- B. Repetitive manufacturing profile
- C. Production cost collector
- D. Production version
Answer: A,D
NEW QUESTION # 28
What data can you maintain in the subitems of a bill of material (BOM)? Note: There are 2 correct answers to this question.
- A. Quantity
- B. Scrap percentage
- C. Status
- D. Installation point
Answer: A,D
NEW QUESTION # 29
You are trying to create a production order and NO valid production version can be selected. What could be the reasons?
Note: There are 2 correct answers to this question.
- A. NO production lines are assigned to the production versions..
- B. NO bills of material (BOMs) are assigned to the production versions.
- C. All production versions for the material are locked.
- D. The order lot size is NOT within the validity range of a production version.
Answer: B,D
Explanation:
A production version is a master data object that links a bill of material (BOM) and a routing or a production process model (PPM) for a material. A production version is required for creating a production order in SAP S/4HANA, as it determines the components, operations, and resources that are needed for producing the material. You can create a production version manually or automatically using the CS_BOM_PRODVER_MIGRATION02 report1.
If you are trying to create a production order and no valid production version can be selected, it could be because of the following reasons:
No bills of material (BOMs) are assigned to the production versions (A): A BOM is a master data object that defines the components and the quantities that are required for producing a material. A production version must have a valid BOM assigned to it, otherwise it cannot be used for creating a production order. You can assign a BOM to a production version on the MRP 4 tab page of the material master2.
The order lot size is not within the validity range of a production version (C): A production version has a validity range that defines the period and the lot size interval in which it can be used for production planning. The validity range is maintained on the MRP 4 tab page of the material master2. If the order lot size (the quantity of the material to be produced) is not within the lot size interval of any production version, then no valid production version can be selected for creating a production order.
The other options are not valid reasons for not being able to select a production version for creating a production order:
All production versions for the material are locked (B): A production version can have a status that indicates whether it is active or locked. A locked production version cannot be used for production planning, but it can still be selected for creating a production order. However, the system will issue a warning message that the production version is locked and ask for confirmation before proceeding with the order creation3.
No production lines are assigned to the production versions (D): A production line is an organizational unit that represents a group of resources that are used for producing a material. A production line can be assigned to a production version on the MRP 4 tab page of the material master2. However, this assignment is optional and not mandatory for creating a production order. A production line can be used for grouping production versions for reporting or analysis purposes, but it does not affect the selection of a production version for creating a production order4.
NEW QUESTION # 30
You are a consultant on an SAP S/4HANA Cloud Greenfield project.
Which of the following aspects should you focus on to achieve maintain clean core data quality? Note: There are 2 correct answers to this question.
- A. Stability
- B. Timeliness
- C. Efficiency
- D. Accuracy
Answer: A,C
NEW QUESTION # 31
How can a material availability check be triggered automatically for a production order?
Note: There are 2 correct answers to this question.
- A. By order release
- B. By mass processing
- C. By capacity planning
- D. By order confirmation
Answer: A,B
Explanation:
A material availability check can be triggered automatically for a production order by the following methods:
By mass processing: You can use the mass processing function to execute material availability checks for multiple production orders at once. You can use the Manage Production Orders app or the transaction COHV to perform mass processing. You can define the selection criteria and the scope of check for the orders to be checked. The system updates the availability status and the committed quantities for the checked orders.
By order release: You can configure the system to trigger a material availability check automatically when a production order is released. You can use the Customizing activity Define Checking Control to define the checking rule and the scope of check for the order release. The system updates the availability status and the committed quantities for the released order. Reference: Executing Material Availability Checks; [SAP S/4HANA Production Planning and Manufacturing Certification Guide], page 83.
NEW QUESTION # 32
You want to trigger inhouse production of a semifinished material before a sales order for the corresponding finished good is received.Which planning strategy supports the consumption of planned independent requirements by dependent requirements for the semifinished material?
- A. Production by lot size (30)
- B. Assembly processing with production orders (82)
- C. Planning with final assembly (40)
- D. Planning at assembly level (70)
Answer: D
NEW QUESTION # 33
Where do you maintain data to determine the duration of an operation for production? Note: There are 2 correct answers to this question.
- A. Routing
- B. Work center
- C. Material master
- D. Production version
Answer: A,B
NEW QUESTION # 34
Which business processes are affected by settings in the order-type-dependent parameters?
Note: There are 2 correct answers to this question.
- A. Define integration with cost accounting.
- B. Select master data.
- C. Schedule production orders.
- D. Check material availability.
Answer: C,D
Explanation:
The order-type-dependent parameters are configuration settings that control various aspects of production order processing, such as number range, scheduling type, availability check, costing variant, confirmation parameters, and so on. These parameters are assigned to a production order type, which is a key that defines the characteristics and business rules of a production order. The order-type-dependent parameters affect the following business processes:
Check material availability: The availability check determines whether the required materials and capacities are available for the production order. The availability check is controlled by the checking rule and the checking group, which are defined in the order-type-dependent parameters. The checking rule specifies which stocks, receipts, and issues are considered in the availability check. The checking group determines how the system responds to the availability situation, such as issuing a warning or an error message, or rescheduling the order.
Schedule production orders: The scheduling of production orders calculates the planned dates and times for the operations and the order. The scheduling is controlled by the scheduling type and the scheduling parameters, which are defined in the order-type-dependent parameters. The scheduling type determines whether the system performs forward or backward scheduling, and whether it considers the basic dates or the production dates. The scheduling parameters determine how the system calculates the operation durations, interoperation times, and floats. Reference: [SAP S/4HANA Production Planning and Manufacturing Certification Guide], page 123; [SAP Help Portal: Order-Type-Dependent Parameters].
NEW QUESTION # 35
......
Achive your Success with Latest C-TS422-2023 Exam: https://www.realexamfree.com/C-TS422-2023-real-exam-dumps.html
Achieve The Utmost Performance In C-TS422-2023 Exam Pass Guaranteed: https://drive.google.com/open?id=1C9zsvKsB2oHwj5Qq58E2uV8UpPHXLuNh
