The New SPLK-4001 2023 Updated Verified Study Guides & Best Courses
Authentic SPLK-4001 Exam Dumps PDF - 2023 Updated
NEW QUESTION # 10
The alert recipients tab specifies where notification messages should be sent when alerts are triggered or cleared. Which of the below options can be used? (select all that apply)
- A. Invoke a webhook URL.
- B. Export to CSV.
- C. Send an SMS message.
- D. Send to email addresses.
Answer: A,C,D
Explanation:
Explanation
The alert recipients tab specifies where notification messages should be sent when alerts are triggered or cleared. The options that can be used are:
Invoke a webhook URL. This option allows you to send a HTTP POST request to a custom URL that can perform various actions based on the alert information. For example, you can use a webhook to create a ticket in a service desk system, post a message to a chat channel, or trigger another workflow1 Send an SMS message. This option allows you to send a text message to one or more phone numbers when an alert is triggered or cleared. You can customize the message content and format using variables and templates2 Send to email addresses. This option allows you to send an email notification to one or more recipients when an alert is triggered or cleared. You can customize the email subject, body, and attachments using variables and templates. You can also include information from search results, the search job, and alert triggering in the email3 Therefore, the correct answer is A, C, and D.
1: https://docs.splunk.com/Documentation/Splunk/latest/Alert/Webhooks 2:
https://docs.splunk.com/Documentation/Splunk/latest/Alert/SMSnotification 3:
https://docs.splunk.com/Documentation/Splunk/latest/Alert/Emailnotification
NEW QUESTION # 11
What are the best practices for creating detectors? (select all that apply)
- A. View data at highest resolution.
- B. Have a consistent type of measurement.
- C. View detector in a chart.
- D. Have a consistent value.
Answer: A,B,C,D
Explanation:
Explanation
The best practices for creating detectors are:
View data at highest resolution. This helps to avoid missing important signals or patterns in the data that could indicate anomalies or issues1 Have a consistent value. This means that the metric or dimension used for detection should have a clear and stable meaning across different sources, contexts, and time periods. For example, avoid using metrics that are affected by changes in configuration, sampling, or aggregation2 View detector in a chart. This helps to visualize the data and the detector logic, as well as to identify any false positives or negatives. It also allows to adjust the detector parameters and thresholds based on the data distribution and behavior3 Have a consistent type of measurement. This means that the metric or dimension used for detection should have the same unit and scale across different sources, contexts, and time periods. For example, avoid mixing bytes and bits, or seconds and milliseconds.
1: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 2:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 3:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#View-detector-in-a-chart :
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors
NEW QUESTION # 12
Which of the following statements about adding properties to MTS are true? (select all that apply)
- A. Properties can be set via the API.
- B. Properties can be set in the UI under Metric Metadata.
- C. Properties are sent in with datapoints.
- D. Properties are applied to dimension key:value pairs and propagated to all MTS with that dimension
Answer: A,B
Explanation:
Explanation
According to the web search results, properties are key-value pairs that you can assign to dimensions of existing metric time series (MTS) in Splunk Observability Cloud1. Properties provide additional context and information about the metrics, such as the environment, role, or owner of the dimension. For example, you can add the property use: QA to the host dimension of your metrics to indicate that the host that is sending the data is used for QA.
To add properties to MTS, you can use either the API or the UI. The API allows you to programmatically create, update, delete, and list properties for dimensions using HTTP requests2. The UI allows you to interactively create, edit, and delete properties for dimensions using the Metric Metadata page under Settings3.
Therefore, option A and D are correct.
NEW QUESTION # 13
Which of the following are true about organization metrics? (select all that apply)
- A. Organization metrics count towards custom MTS limits.
- B. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
- C. Organization metrics are included for free.
- D. Organization metrics give insights into system usage, system limits, data ingested and token quotas.
Answer: B,C,D
Explanation:
Explanation
The correct answer is A, C, and D. Organization metrics give insights into system usage, system limits, data ingested and token quotas. Organization metrics are included for free. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
Organization metrics are a set of metrics that Splunk Observability Cloud provides to help you measure your organization's usage of the platform. They include metrics such as:
Ingest metrics: Measure the data you're sending to Infrastructure Monitoring, such as the number of data points you've sent.
App usage metrics: Measure your use of application features, such as the number of dashboards in your organization.
Integration metrics: Measure your use of cloud services integrated with your organization, such as the number of calls to the AWS CloudWatch API.
Resource metrics: Measure your use of resources that you can specify limits for, such as the number of custom metric time series (MTS) you've created1 Organization metrics are not charged and do not count against any system limits. You can view them in built-in charts on the Organization Overview page or in custom charts using the Metric Finder. You can also create alerts based on organization metrics to monitor your usage and performance1 To learn more about how to use organization metrics in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/observability/admin/org-metrics.html
NEW QUESTION # 14
Which of the following statements is true of detectors created from a chart on a custom dashboard?
- A. The detector is automatically linked to the chart.
- B. Changes made to the detector affect the chart.
- C. Changes made to the chart affect the detector.
- D. The alerts will show up in the team landing page.
Answer: A
Explanation:
Explanation
The correct answer is D. The detector is automatically linked to the chart.
When you create a detector from a chart on a custom dashboard, the detector is automatically linked to the chart. This means that you can see the detector status and alerts on the chart, and you can access the detector settings from the chart menu. You can also unlink the detector from the chart if you want to1 Changes made to the chart do not affect the detector, and changes made to the detector do not affect the chart.
The detector and the chart are independent entities that have their own settings and parameters. However, if you change the metric or dimension of the chart, you might lose the link to the detector1 The alerts generated by the detector will show up in the Alerts page, where you can view, manage, and acknowledge them. You can also see them on the team landing page if you assign the detector to a team2 To learn more about how to create and link detectors from charts on custom dashboards, you can refer to this documentation1.
1: https://docs.splunk.com/observability/alerts-detectors-notifications/link-detectors-to-charts.html 2:
https://docs.splunk.com/observability/alerts-detectors-notifications/view-manage-alerts.html
NEW QUESTION # 15
A customer operates a caching web proxy. They want to calculate the cache hit rate for their service. What is the best way to achieve this?
- A. Chart Options and metadata
- B. Percentages and ratios
- C. Timeshift and Top N
- D. Timeshift and Bottom N
Answer: B
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, percentages and ratios are useful for calculating the proportion of one metric to another, such as cache hits to cache misses, or successful requests to failed requests. You can use the percentage() or ratio() functions in SignalFlow to compute these values and display them in charts. For example, to calculate the cache hit rate for a service, you can use the following SignalFlow code:
percentage(counters("cache.hits"), counters("cache.misses"))
This will return the percentage of cache hits out of the total number of cache attempts. You can also use the ratio() function to get the same result, but as a decimal value instead of a percentage.
ratio(counters("cache.hits"), counters("cache.misses"))
NEW QUESTION # 16
Which of the following statements are true about local data links? (select all that apply)
- A. Local data links can only have a Splunk Observability Cloud internal destination.
- B. Anyone with write permission for a dashboard can add local data links that appear on that dashboard.
- C. Only Splunk Observability Cloud administrators can create local links.
- D. Local data links are available on only one dashboard.
Answer: B,D
Explanation:
Explanation
The correct answers are A and D.
According to the Get started with Splunk Observability Cloud document1, one of the topics that is covered in the Getting Data into Splunk Observability Cloud course is global and local data links. Data links are shortcuts that provide convenient access to related resources, such as Splunk Observability Cloud dashboards, Splunk Cloud Platform and Splunk Enterprise, custom URLs, and Kibana logs.
The document explains that there are two types of data links: global and local. Global data links are available on all dashboards and charts, while local data links are available on only one dashboard. The document also provides the following information about local data links:
Anyone with write permission for a dashboard can add local data links that appear on that dashboard.
Local data links can have either a Splunk Observability Cloud internal destination or an external destination, such as a custom URL or a Kibana log.
Only Splunk Observability Cloud administrators can delete local data links.
Therefore, based on this document, we can conclude that A and D are true statements about local data links. B and C are false statements because:
B is false because local data links can have an external destination as well as an internal one.
C is false because anyone with write permission for a dashboard can create local data links, not just administrators.
NEW QUESTION # 17
How is it possible to create a dashboard group that no one else can edit?
- A. Restrict the write access on the dashboard group.
- B. Ask the admin to lock the dashboard group.
- C. Hide the edit menu on the dashboard group.
- D. Link the dashboard group to the team.
Answer: A
Explanation:
Explanation
According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group1. To create a dashboard group that no one else can edit, you need to do the following steps:
Create a dashboard group as usual, by selecting Dashboard Group from the Create menu on the navigation bar, entering a name and description, and adding dashboards to the group1.
Select Alert settings from the Dashboard actions menu () on the top right corner of the dashboard group. This will open a dialog box where you can configure the permissions for the dashboard group1.
Under Write access, select Only me. This will restrict the write access to the dashboard group to yourself only. No one else will be able to edit or delete the dashboards in the group1.
Click Save. This will create a dashboard group that no one else can edit.
NEW QUESTION # 18
Which analytic function can be used to discover peak page visits for a site over the last day?
- A. Lag: (24h)
- B. Maximum: Aggregation (Id)
- C. Maximum: Transformation (24h)
- D. Count: (Id)
Answer: C
Explanation:
Explanation
According to the Splunk Observability Cloud documentation1, the maximum function is an analytic function that returns the highest value of a metric or a dimension over a specified time interval. The maximum function can be used as a transformation or an aggregation. A transformation applies the function to each metric time series (MTS) individually, while an aggregation applies the function to all MTS and returns a single value. For example, to discover the peak page visits for a site over the last day, you can use the following SignalFlow code:
maximum(24h, counters("page.visits"))
This will return the highest value of the page.visits counter metric for each MTS over the last 24 hours. You can then use a chart to visualize the results and identify the peak page visits for each MTS.
NEW QUESTION # 19
When writing a detector with a large number of MTS, such as memory. free in a deployment with 30,000 hosts, it is possible to exceed the cap of MTS that can be contained in a single plot. Which of the choices below would most likely reduce the number of MTS below the plot cap?
- A. When creating the plot, add a discriminator.
- B. Select the Sharded option when creating the plot.
- C. Add a restricted scope adjustment to the plot.
- D. Add a filter to narrow the scope of the measurement.
Answer: D
Explanation:
Explanation
The correct answer is B. Add a filter to narrow the scope of the measurement.
A filter is a way to reduce the number of metric time series (MTS) that are displayed on a chart or used in a detector. A filter specifies one or more dimensions and values that the MTS must have in order to be included.
For example, if you want to monitor the memory.free metric only for hosts that belong to a certain cluster, you can add a filter like cluster:my-cluster to the plot or detector. This will exclude any MTS that do not have the cluster dimension or have a different value for it1 Adding a filter can help you avoid exceeding the plot cap, which is the maximum number of MTS that can be contained in a single plot. The plot cap is 100,000 by default, but it can be changed by contacting Splunk Support2 To learn more about how to use filters in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/Observability/gdi/metrics/search.html#Filter-metrics 2:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Plot-cap 3:
https://docs.splunk.com/Observability/gdi/metrics/search.html
NEW QUESTION # 20
Which of the following are accurate reasons to clone a detector? (select all that apply)
- A. To modify the rules without affecting the existing detector.
- B. To explore how a detector was created without risk of changing it.
- C. To add an additional recipient to the detector's alerts.
- D. To reduce the amount of billed TAPM for the detector.
Answer: A,B
Explanation:
Explanation
The correct answers are A and D.
According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the alerting concepts that is covered in the exam is detectors and alerts. Detectors are the objects that define the conditions for generating alerts, and alerts are the notifications that are sent when those conditions are met.
The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Alerting with Detectors, which covers how to create, modify, and manage detectors and alerts.
In the Alerting with Detectors course, there is a section on Cloning Detectors, which explains that cloning a detector creates a copy of the detector with all its settings, rules, and alert recipients. The document also provides some reasons why you might want to clone a detector, such as:
To modify the rules without affecting the existing detector. This can be useful if you want to test different thresholds or conditions before applying them to the original detector.
To explore how a detector was created without risk of changing it. This can be helpful if you want to learn from an existing detector or use it as a template for creating a new one.
Therefore, based on these documents, we can conclude that A and D are accurate reasons to clone a detector.
B and C are not valid reasons because:
Cloning a detector does not reduce the amount of billed TAPM for the detector. TAPM stands for Tracked Active Problem Metric, which is a metric that has been alerted on by a detector. Cloning a detector does not change the number of TAPM that are generated by the original detector or the clone.
Cloning a detector does not add an additional recipient to the detector's alerts. Cloning a detector copies the alert recipients from the original detector, but it does not add any new ones. To add an additional recipient to a detector's alerts, you need to edit the alert settings of the detector.
NEW QUESTION # 21
A DevOps engineer wants to determine if the latency their application experiences is growing fester after a new software release a week ago. They have already created two plot lines, A and B, that represent the current latency and the latency a week ago, respectively. How can the engineer use these two plot lines to determine the rate of change in latency?
- A. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
- B. Create a temporary plot by dragging items A and B into the Analytics Explorer window.
- C. Create a plot C using the formula (A-B) and add a scale:percent function to express the rate of change as a percentage.
- D. Create a temporary plot by clicking the Change% button in the upper-right corner of the plot showing lines A and B.
Answer: A
Explanation:
Explanation
The correct answer is C. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
To calculate the rate of change in latency, you need to compare the current latency (plot A) with the latency a week ago (plot B). One way to do this is to use the formula (A/B-l), which gives you the ratio of the current latency to the previous latency minus one. This ratio represents how much the current latency has increased or decreased relative to the previous latency. For example, if the current latency is 200 ms and the previous latency is 100 ms, then the ratio is (200/100-l) = 1, which means the current latency is 100% higher than the previous latency1 To express the rate of change as a percentage, you need to multiply the ratio by 100. You can do this by adding a scale: 100 function to the formula. This function scales the values of the plot by a factor of 100. For example, if the ratio is 1, then the scaled value is 100%2 To create a plot C using the formula (A/B-l) and add a scale: 100 function, you need to follow these steps:
Select plot A and plot B from the Metric Finder.
Click on Add Analytics and choose Formula from the list of functions.
In the Formula window, enter (A/B-l) as the formula and click Apply.
Click on Add Analytics again and choose Scale from the list of functions.
In the Scale window, enter 100 as the factor and click Apply.
You should see a new plot C that shows the rate of change in latency as a percentage.
To learn more about how to use formulas and scale functions in Splunk Observability Cloud, you can refer to these documentations34.
1: https://www.mathsisfun.com/numbers/percentage-change.html 2:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale 3:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Formula 4:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale
NEW QUESTION # 22
What happens when the limit of allowed dimensions is exceeded for an MTS?
- A. The datapoint is dropped.
- B. The datapoint is updated.
- C. The datapoint is averaged.
- D. The additional dimensions are dropped.
Answer: D
Explanation:
Explanation
According to the web search results, dimensions are metadata in the form of key-value pairs that monitoring software sends in along with the metrics. The set of metric time series (MTS) dimensions sent during ingest is used, along with the metric name, to uniquely identify an MTS1. Splunk Observability Cloud has a limit of 36 unique dimensions per MTS2. If the limit of allowed dimensions is exceeded for an MTS, the additional dimensions are dropped and not stored or indexed by Observability Cloud2. This means that the data point is still ingested, but without the extra dimensions. Therefore, option A is correct.
NEW QUESTION # 23
A customer wants to share a collection of charts with their entire SRE organization. What feature of Splunk Observability Cloud makes this possible?
- A. Dashboard groups
- B. Shared charts
- C. Public dashboards
- D. Chart exporter
Answer: A
Explanation:
Explanation
According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can create dashboard groups based on different criteria, such as service, team, role, or topic. You can also set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group. Dashboard groups make it possible to share a collection of charts with your entire SRE organization, or any other group of users that you want to collaborate with.
NEW QUESTION # 24
A customer is experiencing issues getting metrics from a new receiver they have configured in the OpenTelemetry Collector. How would the customer go about troubleshooting further with the logging exporter?
- A. Adding logging into the metrics receiver pipeline:
- B. Adding logging into the metrics exporter pipeline:
- C. Adding debug into the metrics exporter pipeline:
- D. Adding debug into the metrics receiver pipeline:
Answer: A
Explanation:
Explanation
The correct answer is B. Adding logging into the metrics receiver pipeline.
The logging exporter is a component that allows the OpenTelemetry Collector to send traces, metrics, and logs directly to the console. It can be used to diagnose and troubleshoot issues with telemetry received and processed by the Collector, or to obtain samples for other purposes1 To activate the logging exporter, you need to add it to the pipeline that you want to diagnose. In this case, since you are experiencing issues with a new receiver for metrics, you need to add the logging exporter to the metrics receiver pipeline. This will create a new plot that shows the metrics received by the Collector and any errors or warnings that might occur1 The image that you have sent with your question shows how to add the logging exporter to the metrics receiver pipeline. You can see that the exporters section of the metrics pipeline includes logging as one of the options.
This means that the metrics received by any of the receivers listed in the receivers section will be sent to the logging exporter as well as to any other exporters listed2 To learn more about how to use the logging exporter in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/Observability/gdi/opentelemetry/components/logging-exporter.html 2:
https://docs.splunk.com/Observability/gdi/opentelemetry/exposed-endpoints.html
NEW QUESTION # 25
An SRE came across an existing detector that is a good starting point for a detector they want to create. They clone the detector, update the metric, and add multiple new signals. As a result of the cloned detector, which of the following is true?
- A. The new signals will be reflected in the original chart.
- B. The new signals will be reflected in the original detector.
- C. You can only monitor one of the new signals.
- D. The new signals will not be added to the original detector.
Answer: D
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, cloning a detector creates a copy of the detector that you can modify without affecting the original detector. You can change the metric, filter, and signal settings of the cloned detector. However, the new signals that you add to the cloned detector will not be reflected in the original detector, nor in the original chart that the detector was based on. Therefore, option D is correct.
Option A is incorrect because the new signals will not be reflected in the original detector. Option B is incorrect because the new signals will not be reflected in the original chart. Option C is incorrect because you can monitor all of the new signals that you add to the cloned detector.
NEW QUESTION # 26
One server in a customer's data center is regularly restarting due to power supply issues. What type of dashboard could be used to view charts and create detectors for this server?
- A. Single-instance dashboard
- B. Server dashboard
- C. Multiple-service dashboard
- D. Machine dashboard
Answer: A
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, a single-instance dashboard is a type of dashboard that displays charts and information for a single instance of a service or host. You can use a single-instance dashboard to monitor the performance and health of a specific server, such as the one that is restarting due to power supply issues. You can also create detectors for the metrics that are relevant to the server, such as CPU usage, memory usage, disk usage, and uptime. Therefore, option A is correct.
NEW QUESTION # 27
To smooth a very spiky cpu.utilization metric, what is the correct analytic function to better see if the cpu.
utilization for servers is trending up over time?
- A. Mean (Transformation)
- B. Rate/Sec
- C. Mean (by host)
- D. Median
Answer: A
Explanation:
Explanation
The correct answer is D. Mean (Transformation).
According to the web search results, a mean transformation is an analytic function that returns the average value of a metric or a dimension over a specified time interval1. A mean transformation can be used to smooth a very spiky metric, such as cpu.utilization, by reducing the impact of outliers and noise. A mean transformation can also help to see if the metric is trending up or down over time, by showing the general direction of the average value. For example, to smooth the cpu.utilization metric and see if it is trending up over time, you can use the following SignalFlow code:
mean(1h, counters("cpu.utilization"))
This will return the average value of the cpu.utilization counter metric for each metric time series (MTS) over the last hour. You can then use a chart to visualize the results and compare the mean values across different MTS.
Option A is incorrect because rate/sec is not an analytic function, but rather a rollup function that returns the rate of change of data points in the MTS reporting interval1. Rate/sec can be used to convert cumulative counter metrics into counter metrics, but it does not smooth or trend a metric. Option B is incorrect because median is not an analytic function, but rather an aggregation function that returns the middle value of a metric or a dimension over the entire time range1. Median can be used to find the typical value of a metric, but it does not smooth or trend a metric. Option C is incorrect because mean (by host) is not an analytic function, but rather an aggregation function that returns the average value of a metric or a dimension across all MTS with the same host dimension1. Mean (by host) can be used to compare the performance of different hosts, but it does not smooth or trend a metric.
Mean (Transformation) is an analytic function that allows you to smooth a very spiky metric by applying a moving average over a specified time window. This can help you see the general trend of the metric over time, without being distracted by the short-term fluctuations1 To use Mean (Transformation) on a cpu.utilization metric, you need to select the metric from the Metric Finder, then click on Add Analytics and choose Mean (Transformation) from the list of functions. You can then specify the time window for the moving average, such as 5 minutes, 15 minutes, or 1 hour. You can also group the metric by host or any other dimension to compare the smoothed values across different servers2 To learn more about how to use Mean (Transformation) and other analytic functions in Splunk Observability Cloud, you can refer to this documentation2.
1: https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Mean-Transformation 2:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html
NEW QUESTION # 28
What is the limit on the number of properties that an MTS can have?
- A. 0
- B. No limit
- C. 1
- D. 2
Answer: A
Explanation:
Explanation
The correct answer is A. 64.
According to the web search results, the limit on the number of properties that an MTS can have is 64. A property is a key-value pair that you can assign to a dimension of an existing MTS to add more context to the metrics. For example, you can add the property use: QA to the host dimension of your metrics to indicate that the host is used for QA1 Properties are different from dimensions, which are key-value pairs that are sent along with the metrics at the time of ingest. Dimensions, along with the metric name, uniquely identify an MTS. The limit on the number of dimensions per MTS is 362 To learn more about how to use properties and dimensions in Splunk Observability Cloud, you can refer to this documentation2.
1:
https://docs.splunk.com/Observability/metrics-and-metadata/metrics-dimensions-mts.html#Custom-properties
2: https://docs.splunk.com/Observability/metrics-and-metadata/metrics-dimensions-mts.html
NEW QUESTION # 29
Which of the following can be configured when subscribing to a built-in detector?
- A. Alerts on team landing page.
- B. Links to a chart.
- C. Outbound notifications.
- D. Alerts on a dashboard.
Answer: C
Explanation:
Explanation
According to the web search results1, subscribing to a built-in detector is a way to receive alerts and notifications from Splunk Observability Cloud when certain criteria are met. A built-in detector is a detector that is automatically created and configured by Splunk Observability Cloud based on the data from your integrations, such as AWS, Kubernetes, or OpenTelemetry1. To subscribe to a built-in detector, you need to do the following steps:
Find the built-in detector that you want to subscribe to. You can use the metric finder or the dashboard groups to locate the built-in detectors that are relevant to your data sources1.
Hover over the built-in detector and click the Subscribe button. This will open a dialog box where you can configure your subscription settings1.
Choose an outbound notification channel from the drop-down menu. This is where you can specify how you want to receive the alert notifications from the built-in detector. You can choose from various channels, such as email, Slack, PagerDuty, webhook, and so on2. You can also create a new notification channel by clicking the + icon2.
Enter the notification details for the selected channel. This may include your email address, Slack channel name, PagerDuty service key, webhook URL, and so on2. You can also customize the notification message with variables and markdown formatting2.
Click Save. This will subscribe you to the built-in detector and send you alert notifications through the chosen channel when the detector triggers or clears an alert.
Therefore, option C is correct.
NEW QUESTION # 30
Which of the following chart visualization types are unaffected by changing the time picker on a dashboard?
(select all that apply)
- A. List
- B. Line
- C. Single Value
- D. Heatmap
Answer: A,C
Explanation:
Explanation
The chart visualization types that are unaffected by changing the time picker on a dashboard are:
Single Value: A single value chart shows the current value of a metric or an expression. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart1 List: A list chart shows the values of a metric or an expression for each dimension value in a table format. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart2 Therefore, the correct answer is A and D.
To learn more about how to use different chart visualization types in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/Observability/gdi/metrics/charts.html#Single-value 2:
https://docs.splunk.com/Observability/gdi/metrics/charts.html#List 3:
https://docs.splunk.com/Observability/gdi/metrics/charts.html
NEW QUESTION # 31
......
Get Prepared for Your SPLK-4001 Exam With Actual 56 Questions: https://www.realexamfree.com/SPLK-4001-real-exam-dumps.html
Valid SPLK-4001 Test Answers Full-length Practice Certification Exams: https://drive.google.com/open?id=14I1-IiYVt2NXDJypKMOVJKXYUKJz6ezq
