Released HP HPE0-J58 Updated Questions PDF
HPE0-J58 Dumps and Practice Test (118 Exam Questions)
NEW QUESTION 47
You are proposing StoreOnce as a new backup target.
Which features should you emphasize that will help the customer protect and recover data from external
attacks on local data? (Select two.)
- A. StoreOnce has encryption of data at rest and data in-flight
- B. StoreOnce has firewalls to protect the repositories
- C. StoreOnce is immune from ransomware
- D. StoreOnce has malware protection
- E. StoreOnce Catalyst stores are only accessible via the API
Answer: A,C
NEW QUESTION 48
A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3 minutes.
Which replication method should you recommend to meet the customer needs?
- A. RCFC is Synchronous mode
- B. RCFC in Asynchronous Periodic Mode
- C. RCIP in Asynchronous Streaming mode
- D. RCIP is Synchronous mode
Answer: C
NEW QUESTION 49
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of two minutes
- B. They have an RPO of four minutes
- C. They need to send a screenshot of the volumes tab
- D. They need to verify the RPO level from the host vc-ms-fileserver
Answer: B
NEW QUESTION 50
Refer to the exhibit.
A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to...
A junior architect you are coaching created the configuration shown for each array
What should you add to me configuration for each array to meet customer performance requirements?
- A. SAS bus multiplexers
- B. 32 additional SSD drives
- C. 1 additional pair of nodes
- D. 4 additional disk enclosures
Answer: C
NEW QUESTION 51
A customer is interested in deploying Peer Persistence to take advantage of automated transparent failovers. Which failure scenario will trigger an automated transparent failover?
- A. Both sites lose communications to the Quorum witness, and Array-to-Array communication tans
- B. Single site to Quorum Witness and Array-to-Array communications fan
- C. Quorum Witness communication is functioning, and there is an Array-to-Array communication failure.
- D. Single site to Quorum Witness communication fails, and Array-to-Array communication is functioning
Answer: B
NEW QUESTION 52
A customer requires a 5 PB object storage solution across two sites.
Which storage solution meets this requirement1?
- A. HPE Nimble StorageAF 80 4-array group
- B. HPE 3PAR 8450 d-node with File Persona
- C. HPE SimpliVity 380. 16 node configuration
- D. HPE with Scality RING on Apollo 4000 servers
Answer: B
NEW QUESTION 53
You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected to develop reports for a new proposal. What must you do first to begin the process?
- A. Export the data as .xml
- B. Create a gatekeeper on your SAF utility server
- C. Create a single .zip file of all data exports
- D. Create a new opportunity
Answer: C
NEW QUESTION 54
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is 200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth will have to be increased, and replication must happen every 10 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 5 minutes
- D. The bandwidth is sufficient, and replication must happen every 5 minutes
Answer: C
NEW QUESTION 55
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. Compression technologies increase the effective bandwidth being available for replication and disaster
recovery - B. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
- C. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- D. The arrays share deduplication hash tables, and the target array only needs to compress the replicated
data from the source array
Answer: B
NEW QUESTION 56
What is one of the advantages of protecting HPE 3PAR File Persona with RMC?
- A. Backup throughput will be considerably faster than other backup methods
- B. Single file recovery is possible
- C. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
- D. MS SQL data consistency is provided
Answer: A
NEW QUESTION 57
A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array. What does the administrator need to do to make the most recent snapshot available?
- A. Demote the source snapshot
- B. Verify the automatic failover occurred
- C. Promote the target snapshot
- D. Perform a handover between the arrays
Answer: D
NEW QUESTION 58
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- B. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- C. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- D. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
Answer: A
NEW QUESTION 59
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector.
What should be the next step in your design process?
- A. Upload the .zip file to the SAF Portal
- B. Open the .zip file with NinjaSTARS
- C. Send the .zip file to [email protected]
- D. Import the .zip file into OCA
Answer: B
NEW QUESTION 60
You are designing an HPE 3PAR replication solution for a customer in a metropolitan area that includes two main sites and a third disaster recovery site. The main sites will be in synchronous replication. The disaster recovery site can be asynchronously replicated.
What are two points you should highlight to the customer? (Select two.)
- A. Quorum Witness at the third site enables automatic failover to tertiary site
- B. Secondary site volumes paths are active/optimized read/write
- C. Primary site volumes paths are standby read/write
- D. Tertiary site volume paths are active/read only
- E. Quorum Witness at the third site enables automatic failover to the secondary site
Answer: D,E
NEW QUESTION 61
A customer has two sites within a short distance. They require a primary storage solution which supports automatic failover for their block storage, SMB shares, and NFS home directories. Which HPE solution best fits the customer's requirements?
- A. HPE Nimble
- B. HPE 3PAR
- C. HPE StoreOnce
- D. HPE Simplivity
Answer: B
NEW QUESTION 62
You are designing a multi-site replication solution using HPE 3PAR storage array. Which key factor should drive you to choose FCIP over an ROP based solution?
- A. amount of data to replicate is low
- B. amount of data to replicate is high
- C. no host latency impact when using periodic asynchronous replication
- D. network latency exceeds 100 ms
Answer: A
NEW QUESTION 63
You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.
What should you do to use this feature?
- A. Certificates must be obtained from Brocade
- B. Switches must be upgraded to FOS 7.4 or higher
- C. A Secure Fabric license must be added to all switches in the fabric
- D. Certificates must be obtained from a third-party vendor
Answer: B
NEW QUESTION 64
Which HPE 3PAR functionality allows addition of data located on non-HPE storage systems to an HPE 3PAR Storage Federation?
- A. HPE 3PAR Peer Motion
- B. HPE 3PAR Remote Copy
- C. HPE 3PAR Peer Persistence
- D. HPE 3PAR Online Import
Answer: A
NEW QUESTION 65
......
HPE0-J58 Exam Dumps Pass with Updated 2022 Certified Exam Questions: https://www.realexamfree.com/HPE0-J58-real-exam-dumps.html
Guide (New 2022) Actual HP HPE0-J58 Exam Questions: https://drive.google.com/open?id=1wImu0oUXYRGoSVIQbiuC0lYJqZKoHMpq
