Pass Exam Questions Efficiently With 5V0-22.21 Questions (2023) [Q45-Q70]

Pass Exam Questions Efficiently With 5V0-22.21 Questions (2023) 

5V0-22.21 Questions - Truly Beneficial For Your VMware Exam 

VMware 5V0-22.21 exam is a 60-minute test consisting of 40 multiple-choice questions. 5V0-22.21 exam covers a variety of topics, including vSAN architecture and components, vSAN policies and data services, vSAN cluster configuration and management, vSAN monitoring and troubleshooting, and vSAN interoperability with other VMware products. 5V0-22.21 exam is available in English and Japanese and can be taken online or in-person at a Pearson VUE testing center.

 

NEW QUESTION # 45
During yesterday's business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?

• A. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
• B. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.
• C. Remove the existing vSAN disk group, and physically replace the device. Then, check to verity that the ESXi host automatically detects the new device. Afterwards, manually recreate the Disk Group.
• D. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Answer: D

NEW QUESTION # 46
A vSAN administrator is looking at adding a new vSAN cluster with hosts that have 512GB memory.
What is the minimum requirement for the node's flash boot device?

• A. 4GB
• B. 32GB
• C. 16GB
• D. 128GB

Answer: A

NEW QUESTION # 47
Skyline Health vSAN HCL DB up-to-date health check is alerting in red in a newly deployed vCenter Server.
Which two options are the possible solutions for this problem? (Choose two.)

• A. Obtain the HCL DB from the hardware vendor, and manually update it.
• B. Update the HCL DB online from vmware.com.
• C. Upgrade the HCL DB from the hardware vendor website.
• D. Obtain the HCL DB offline bundle from vmware.com, and manually update it.
• E. Upgrade to the latest version of vCenter.

Answer: D,E

NEW QUESTION # 48
A vSAN administrator has recently upgraded to vSAN 7.0 U1. The vSAN administrator wants to control the amount of Capacity Reserve to use the underutilized capacity of -140TB in the cluster of 12 vSAN ReadyNodes & 400TB storage for vSAN internal operations.
Which two options should be used to accomplish this goal? (Choose two.)

• A. Host Rebuild Reserve
• B. Slack Rebuild Reserve
• C. Operations Reserve
• D. Buffer Reserve
• E. Capacity Plan Reserve

Answer: C,D

Explanation:
The two options to control the amount of Capacity Reserve to use the underutilized capacity of -140TB in the cluster of 12 vSAN ReadyNodes & 400TB storage for vSAN internal operations are B. Buffer Reserve and E. Operations Reserve. The Buffer Reserve is used to set the size of the buffer between the available capacity and the consumed capacity, and the Operations Reserve is used to set aside capacity for vSAN internal operations.

NEW QUESTION # 49
An organization wants to configure a new storage policy based on the following requirements:
Failures to tolerate = FTT 1/RAID-5 (Erasure Coding)
Number of disk stripes per object = 8
IOPS limit for object = 0
Object Space Reservation = Thin provisioning
Flash read cache reservation = 0%
Disable object checksum = No
Force provisioning = No
The administrator creates the policy using storage policy based management and assigns it to a 100GB virtual machine on a 4-node vSAN cluster to test the results of the new storage policy.
How many components will be created per host for the storage objects of the virtual machine on the vSAN datastore?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

NEW QUESTION # 50
A vSAN administrator would like to configure Cloud Native Storage with File Volumes with vSAN 7.0. Which two requirements must be met? (Choose two.)

• A. vSAN Cloud Native Storage is only available with RDMA-based networking.
• B. The vSAN cluster must be connected to an external NFS storage to provide File Volume services.
• C. Enable and configure vSAN File Services on the vSAN cluster.
• D. Use a compatible version of CSI driver.
• E. The cluster must have a vSAN on-disk format version 5 for Cloud Native Storage to be available.

Answer: C,E

Explanation:
To configure Cloud Native Storage with File Volumes with vSAN 7.0, the cluster must have a vSAN on-disk format version 5 (E) and must have vSAN File Services enabled and configured (C). According to the VMware Official Guide, "To use Cloud Native Storage with File Volumes, the vSAN cluster must have vSAN on-disk format version 5 or later and vSAN File Services must be enabled and configured."

NEW QUESTION # 51
An administrator enabled vSAN and then enabled vSphere HA on the same cluster. Over which network will vSphere HA traverse?

• A. vSAN network
• B. Provisioning network
• C. Default management network
• D. Both vSAN and management network

Answer: C

Explanation:
vSphere HA will traverse the management network (C). According to the VMware Official Guide, "If vSAN and vSphere HA are enabled in the same cluster, vSphere HA will traverse the default management network."

NEW QUESTION # 52
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

• A. Disable vSphere Cluster Services (vCLS).
• B. Disable vSphere High Availability (HA).
• C. Create uniformly-configured hosts.
• D. Disable vSAN performance service.
• E. Reference the VMware Compatibility Guide.

Answer: A,C

NEW QUESTION # 53
A group of virtual machines have the vSAN Default Storage Policy assigned to them. This policy has not been modified from its default settings to date. The vSAN administrator would like to reduce the amount of storage capacity consumed by these virtual machines.
Which action will produce this result?

• A. Assign a new policy with "Failures to tolerate" set to "1-Failure - RAID-5 (Erasure Coding)" to the virtual machines.
• B. Set "Failures to tolerate" in the vSAN Default Storage Policy to "2-Failures - RAID-1 (Mirroring)".
• C. Assign a policy with "Object space reservation" set to "50%" to the virtual machines.
• D. Reduce the "Number of disk stripes per object" from 3 to 2 in the vSAN Default Storage Policy.

Answer: C

Explanation:
Object space reservation is a vSAN storage policy attribute that allows the administrator to set a percentage of the provisioned space to be reserved for the virtual machine disk objects. This attribute can be used to reduce the amount of storage capacity consumed by virtual machines. Setting the "Object space reservation" to "50%" will reserve 50% of the total provisioned space for the virtual machines, and free up the remaining 50% for other objects.
It's worth noting that changing object space reservation can result in a component resync, which could cause a performance impact.
This is explained in VMware vSAN documentation in the section "vSAN Storage Policy" Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-guide/GUID-7E8F6C98-7C0B-4D21-8F1A-F3A3A9F4F4A4.html

NEW QUESTION # 54
A new vSAN Cluster with four hosts has to be designed for a single site architecture.
Which design decision is correct?

• A. Configure the storage controllers to use RAID.
• B. Only hardware listed on the VMware Compatibility Guide will be deployed.
• C. All the data must remain accessible even with two host failures.
• D. Use block-based storage for the newvSAN cluster.

Answer: B

NEW QUESTION # 55
A storage administrator is facing degraded performance for the VMs running on a vSAN enabled vSphere Cluster and needs an out-of-the-box tool to identify the root cause of the problem.
Which tool should be used?

• A. esxcli
• B. vsantop
• C. top
• D. vmkfstools

Answer: B

Explanation:
vsantop is a command line utility that can be used to monitor the performance of a vSAN cluster in real-time. It provides detailed information about the performance of the vSAN cluster and its components, including disk usage, IOPS, network traffic, and object states. It can be used to identify the root cause of performance problems, such as disk contention, network congestion, or object failures. It provides a quick and easy way to identify the root cause of performance issues, making it a useful tool for troubleshooting vSAN clusters.
This is explained in VMware vSAN documentation in the section "vSAN Tools and Troubleshooting" Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-guide/GUID-7E8F6C98-7C0B-4D21-8F1A-F3A3A9F4F4A4.html

NEW QUESTION # 56
A vSAN administrator was examining the status of Virtual Objects and found inaccessible objects that are occupying significant storage capacity.
Refer to the exhibit:

Which action is needed to restore the storage capacity?

• A. Trigger a manual resync, and allow vSAN to heal the object.
• B. Evacuate data on affected node by using the Full Data Migration mode.
• C. Identity and remove the obsolete object.
• D. Restart the host, and obsolete objects will be removed on their own.

Answer: C

NEW QUESTION # 57
A vSAN administrator has been asked to increase the usable storage capacity of an existing vSAN cluster to deploy some new virtual machines containing a large amount of dat a. The details are as follows:
* Each ESXi host in the vSAN cluster is configured with two disk groups.
* Each disk group contains three capacity devices and one cache device.
* Deduplication and compression are not enabled.
* Only the default VM storage policy is in use and had not been changed.
* Add capacity without re-creating disk groups.
The company would like to minimize the number of devices used for cost Optimization.
Which action should the vSAN administrator carry out to provide additional storage to the vSAN cluster?

• A. Creating a third disk group on each host
• B. Deleting and recreating the current disk groups with a larger disk configuration
• C. Changing object space reservation on the default storage policy to 100
• D. Adding new capacity devices to the existing disk groups

Answer: D

Explanation:
In order to increase the usable storage capacity of an existing vSAN cluster without re-creating disk groups, the vSAN administrator should add new capacity devices to the existing disk groups. This will allow additional storage to be added to the vSAN cluster while minimizing the number of devices used for cost optimization.
You can find this information in the VMware vSAN 6.6 Documentation, in the section titled 'Disk Groups': https://docs.vmware.com/en/VMware-vSphere/6.6/com.vmware.vsphere.vsan.doc/GUID-5A5CC5C3-F4C4-4F4D-A6B4-C9A9F36D69FE.html

NEW QUESTION # 58
An administrator has a 4-node vSAN cluster, and all virtual machine storage policies are configured as RAID-1 FTT-1. The administrator puts Host-1 in maintenance mode using "Ensure Accessibility".
During this time, Host-2, which is holding the updated object replica, fails permanently. A few moments later, Host-1 exits maintenance mode.
What happens to the writes that were committed on Host-2 after Host-1 enters this mode?

• A. The latest writes are retrieved from backups.
• B. The latest writes from Host-2 are applied to the stale components of Host-1 once the host exits maintenance mode.
• C. The latest writes were also written on a third host and are applied to the stale components of Host-1 once the host exits maintenance mode.
• D. Any writes to Host-2 that occurred after Host-1 entered maintenance mode are lost.

Answer: B

Explanation:
This is because vSAN maintains a copy of the object on each host that is a member of the vSAN cluster. When a host enters maintenance mode, the object's replica is moved to another host in the cluster. If another host in the cluster fails during this time, it's possible that the updated replica of an object may be lost. However, vSAN will still use the stale replica of the object on the host that exited maintenance mode to service read requests, and will update the stale replica with the latest writes from the remaining host after the host exits maintenance mode.
It is important to note that this scenario assumes that the host failure is a permanent failure and that vSAN does not have any additional data protection methods enabled such as RAID-5, RAID-6, or Erasure Coding.
The correct answer is D. The latest writes from Host-2 are applied to the stale components of Host-1 once the host exits maintenance mode. This is because vSAN utilizes a "write-order fidelity" mechanism which ensures that any writes that were committed to the other hosts in the cluster before Host-1 entered maintenance mode are applied to the stale components of Host-1 as soon as the host exits maintenance mode. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-C1E7F9A5-7F5E-4E7E-A012-2F0F19A3F0A4.html

NEW QUESTION # 59
A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:
* Physical adapters share capacity among several traffic types
* Guaranteed bandwidth for vSAN during bandwidth contention
* Enhanced security
Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)

• A. Use IOPS Limit rules in storage policies
• B. Enable jumbo frames
• C. Create static routes between the vSAN hosts
• D. Isolate vSAN traffic in a VLAN
• E. Utilize Network I/O Control

Answer: D,E

Explanation:
According to VMware's official guide, Network I/O Control (NIOC) should be utilized in order to share the physical adapters' capacity among several traffic types. Additionally, isolating the vSAN traffic in a VLAN will provide enhanced security, as it isolates vSAN traffic from the rest of the network traffic. Enabling jumbo frames and creating static routes between the vSAN hosts will not provide the desired result, as these are not related to the requirements. Utilizing IOPS Limit rules in storage policies is also not related to the requirements, as this is related to storage policies and not network configuration.
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html About the vSAN Default Storage Policy
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html
https://core.vmware.com/resource/vmware-vsan-design-guide
VMware vSAN Design Guide | VMware
https://core.vmware.com/resource/vmware-vsan-design-guide
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html vSAN Policies
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html

NEW QUESTION # 60
A vSAN Administrator has a cluster of six vSAN nodes. The vSAN datastore was 55% utilized, and due to a power outage, one node was lost. The vSAN administrator needs to resolve the storage policy compliance for the virtual machines on RAID-5.
Which action, if any, needs to be taken to meet this goal?

• A. Trigger vSAN object repair from ESXCLI.
• B. Change the RAID-5 FTT from 2 to 1.
• C. No action is needed since vSAN automatically rebuilds the objects.
• D. The one failed node must be restored.

Answer: B

Explanation:
When a node is lost in a vSAN cluster, the vSAN will automatically begin to rebuild objects in order to meet the storage policy compliance. However, if the storage policy includes RAID-5 with a "Failures to Tolerate" (FTT) value of 2, it won't be possible to rebuild the objects and meet the storage policy compliance with only 5 nodes. In this case, the vSAN administrator needs to change the RAID-5 FTT from 2 to 1, this will allow the vSAN to rebuild the objects and meet the storage policy compliance with only 5 nodes. With RAID-5, the FTT value of 1 is the minimum value supported by vSAN.
This is explained in VMware vSAN documentation in the section "RAID-5 and RAID-6 Erasure Coding" Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-config-guide/GUID-1A5F48D5-F8C9-4C7E-9D9B-F9D4B4E4A4F4.html Changing the RAID-5 FTT from 2 to 1 will ensure that the virtual machines on the vSAN datastore are in compliance with the storage policy. This is because, with a RAID-5 FTT of 2, the cluster needs at least 6 nodes to meet the redundancy requirements. With a single node lost, the cluster cannot meet this requirement and so the virtual machines on the datastore will be out of compliance. By changing the FTT from 2 to 1, the cluster will be able to meet the redundancy requirements with only the remaining 5 nodes, ensuring compliance with the storage policy. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.troubleshooting.doc/GUID-F7A0FECC-E95E-4A89-B3B3-9699D9F7D87D.html

NEW QUESTION # 61
Which two storage policy types are used with the vSAN Data Persistence platform? (Choose two.)

• A. TKG extensions
• B. Shared Nothing Architecture
• C. Harbor Registry
• D. vSAN Direct Configuration
• E. Application name spaces

Answer: B,D

Explanation:
According to VMware's official guide, the vSAN Data Persistence platform uses two storage policy types: Shared Nothing Architecture and vSAN Direct Configuration. Shared Nothing Architecture is a policy type that enables virtual machines to share a common storage pool and enables applications to scale out across multiple nodes. vSAN Direct Configuration is a policy type that allows applications to be deployed directly on the vSAN datastore and enables them to use the underlying vSAN storage features.
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html About the vSAN Default Storage Policy
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUID-C228168F-6807-4C2A-9D74-E584CAF49A2A.html
https://core.vmware.com/resource/vmware-vsan-design-guide
VMware vSAN Design Guide | VMware
https://core.vmware.com/resource/vmware-vsan-design-guide
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html vSAN Policies
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html

NEW QUESTION # 62
A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.
Which action should the administrator take?

• A. Add more magnetic capacity devices in the affected host.
• B. Modify the stripe width for the application on the advanced settings for the VM.
• C. Change the Default Storage Policy to have stripe width of 13.
• D. Increase the stripe width based on the number of capacity devices within the disk group.

Answer: B

NEW QUESTION # 63
A VMware vSAN administrator is configuring advanced monitoring with VMware vRealize Operations Manager and has the following requirement:
* Ability to receive analytical information from the hard drive to determine a possible future failure of the hard drive.
What should be enabled for data collection when configuring the vSAN Adapter Instance?

• A. DST (Disk Self-Test)
• B. SSP (Storage Service Provider)
• C. IOPS (Input/Output Operations Per Second)
• D. SMART (Self-Monitoring, Analysis and Reporting Technology)

Answer: D

Explanation:
Self-Monitoring, Analysis and Reporting Technology (SMART) is an industry-standard technology that allows hard drives to report on their own health, including the ability to predict possible future failures. When configuring the vSAN Adapter Instance in vRealize Operations Manager, the administrator should enable SMART data collection to be able to receive analytical information from the hard drives and monitor their health.
By enabling SMART data collection, the administrator can use the data to identify potential issues with hard drives, monitor their health status, and take appropriate actions to prevent data loss.
This is explained in VMware vSAN documentation in the section "Monitoring vSAN Disk Health with vRealize Operations Manager" Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-vsan-70-admin-guide/GUID-9A9B1E1A-7D56-4C0B-A8C2-2A7E27AED9B9.html

NEW QUESTION # 64
An administrator has deployed a dedicated VMware vSAN 7.0 U1 cluster that will be used to provide developers with access to an environment that is running VMware with Tanzu workloads only.
Which vSAN feature should be configured for vSAN Data Persistence platform (vDPp)?

• A. vSAN Cloud Native Storage
• B. vSAN Direct
• C. vSAN with Shared Nothing Architecture (SNA)
• D. vSAN File Services

Answer: C

Explanation:
According to the VMware official documentation, vSAN with SNA is the recommended configuration for the vSAN Data Persistence platform (vDPp). This configuration provides support for high availability [1], scalability, and enterprise-grade security. With SNA, the entire vSAN cluster is connected over a single high-speed network, and each node has direct access to the shared storage. This ensures that workloads are balanced across the cluster, which in turn improves performance and reliability. Additionally, SNA ensures that storage is accessible to all nodes in the cluster, eliminating the need for any centralized storage controllers.
https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-F7223607-30A5-4B2D-9B06-A55A65FEAA11.html
1. Using vSAN Data Persistence Platform with Modern Stateful Services
https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-F7223607-30A5-4B2D-9B06-A55A65FEAA11.html

NEW QUESTION # 65
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

• A. Reference the VMware Compatibility Guide.
• B. Disable vSphere High Availability (HA).
• C. Create uniformly-configured hosts.
• D. Disable vSphere Cluster Services (vCLS).
• E. Disable vSAN performance service.

Answer: A,C

NEW QUESTION # 66
A vSAN administrator has deployed a new All-Flash vSAN cluster and would like to perform a health test on it to verify that the network performance is meeting the network throughput requirements.
Which tool should be used for this purpose?

• A. vSAN Proactive Test
• B. lOlnsight
• C. vSAN Cluster Performance
• D. vSAN Skyline

Answer: A

Explanation:
According to the VMware vSAN documentation [1], the vSAN Proactive Test is a built-in feature of vSAN that can be used to test the health of a vSAN cluster and verify that the network performance meets the throughput requirements. This tool can be accessed through the vSAN Health Service. [1] https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-esxi-vcenter-server-70-vsan-health-service-guide.pdf

NEW QUESTION # 67
An administrator is tasked with configuring vSAN Cloud Native Storage.
Which two requirements must be met for a successful configuration? (Choose two.)

• A. Tanzu Enterprise License required
• B. Minimum of vSphere 6.7 Update 3 or later
• C. Compatible version of Kubernetes
• D. Minimum of vSphere 7.0 Update 2 or later
• E. vSAN iSCSI service enabled

Answer: B,C

NEW QUESTION # 68
A vSAN administrator is tasked with changing the stripe width for a specific storage policy on a vSAN 7.0 GA cluster in order to improve performance, but the component distribution desired is across hosts, not just across a disk group.
Which action, if any, should the administrator take to complete this task?

• A. Upgrade vSAN to 7.0 Update 1.
• B. Enable vSAN Performance Services in order to increase the number of Stripes available across hosts.
• C. Change the default policy to force provisioning to spread components across hosts.
• D. No action is needed.

Answer: C

Explanation:
In order to complete this task, the vSAN administrator should take action D. Change the default policy to force provisioning to spread components across hosts. This can be done by enabling the 'Force Provisioning' option in the storage policy. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-F9F1C7A2-B9F2-4E2C-ABF7-634B2E2D7ABF.html
https://docs.vmware.com/en/VMware-vSphere/7.0/rn/vmware-vsan-701-release-notes.html VMware vSAN 7.0 Update 1 Release Notes
https://docs.vmware.com/en/VMware-vSphere/7.0/rn/vmware-vsan-701-release-notes.html
https://core.vmware.com/resource/vsan-operations-guide
vSAN Operations Guide | VMware
https://core.vmware.com/resource/vsan-operations-guide
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/performance/vsphere-esxi-vcenter-server-70-performance-best-practices.pdf Performance Best Practices for VMware vSphere 7.0
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/performance/vsphere-esxi-vcenter-server-70-performance-best-practices.pdf

NEW QUESTION # 69
During yesterday's business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?

• A. Remove the existing vSAN disk group, and physically replace the device. Then, check to verity that the ESXi host automatically detects the new device. Afterwards, manually recreate the Disk Group.
• B. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
• C. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.
• D. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Answer: A

NEW QUESTION # 70
......

Truly Beneficial For Your VMware Exam: https://www.realexamfree.com/5V0-22.21-real-exam-dumps.html

Download VMware 5V0-22.21 Sample Questions: https://drive.google.com/open?id=1DRfK2jXTobL12qXu9NC0IBd4FewVJTjU