Pass 300-615 Exam Latest Practice Questions Updated on Jun 25, 2024
Cisco 300-615 Study Guide Archives
NEW QUESTION # 126
Drag each item listed on the left to its proper category on the right Not all items will fit the categories.
Answer:
Explanation:
NEW QUESTION # 127
You deploy a multiple FCoE network. What must you consider when you configure the VFC ports?
- A. All of the switches must have the same VSAN list.
- B. All of the switches in the paths must supported vFC Type NL ports
- C. All of the switches in the paths must have the same FC-MAP.
- D. All of the switches in the paths must supported vFC type E ports.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/fcoe/513_n1_1/ops_fcoe/fcoe_ops_overview.html#10071
NEW QUESTION # 128
Refer to the exhibit.
An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?
- A. Set the local group number as 300 in the remote data center configuration
- B. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
- C. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
- D. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.p
NEW QUESTION # 129
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Eth1/7?
- A. IOM network interface
- B. IOM host interface
- C. fabric interconnect uplink interface
- D. server interface
Answer: C
Explanation:
Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.
NEW QUESTION # 130
Drag and Drop Question
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 131
An engineer is troubleshooting an unexpected blade-server reboot. One of the DIMMs is displayed inside Cisco UCS Manager as "degraded with correctable errors" but is still available for the OS to use. Which action resolves the issue?
- A. Reset the BMC.
- B. Replace the CPU.
- C. Replace the DIMM.
- D. Reset the Cisco UCS chassis.
Answer: A
NEW QUESTION # 132
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN.
The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?
- A. Remove all of the local storage that is installed
- B. Delete and reconfigure the pWWN of the SAN boot target
- C. Remove all of the ISO images that are mounted as a virtual CD-ROM
- D. Delete and reconfigure the boot LUN
Answer: A
NEW QUESTION # 133
Refer to the exhibit. An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?
- A. Set the local group number as 300 in the remote data center configuration
- B. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
- C. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
- D. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.pdf
NEW QUESTION # 134
Refer to the exhibit.
A network engineer notices packet drops on FCoE traffic from the servers. Which action resolves the issue?
- A. Enable priority flow control on the interface.
- B. Disable priority flow control on the interface.
- C. Apply flowcontrol receive on the interface.
- D. Apply flowcontrol transmit on the interface.
Answer: A
NEW QUESTION # 135
A network engineer must configure SNMP monitoring on the Cisco Nexus 5000 Series Switch.
The engineer issues the SNMP-server user testuser enforcePriv command but receives this message: "Unable to update CLI users database". Which change to permissions for testuser resolves the issue?
- A. Restrict write permission.
- B. Add write permission.
- C. Restrict read permission.
- D. Add read permission.
Answer: B
NEW QUESTION # 136
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. event-default action statement
- B. environment variable
- C. event statement
- D. configure terminal action
Answer: C
NEW QUESTION # 137
Refer to the exhibit. An engineer troubleshoots an OSPF neighborship problem between Router R2 and Router R10. Which action resolves the problem?
- A. Resolve authentication type on Router R10
- B. Change area ID on Router R10
- C. Change router ID on Router R10
- D. Resolve unicast reply from Router R2
Answer: D
NEW QUESTION # 138
Refer to the exhibit.
After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)
- A. Disable and then re-enable the vPC peer-keepalive link.
- B. Configure the local vPC role priority to have a lower value than Switch-A.
- C. Configure the local vPC role priority to have the same value as Switch-A.
- D. Configure the local vPC role priority to have a higher value than Switch-A.
- E. Disable and then re-enable the vPC peer link.
Answer: D,E
NEW QUESTION # 139
The script fails to convert a JSON variable into a Python dictionary. Which action resolves the issue?
- A. Define a json_output as a YAML object, yaml json_output
- B. Use a json.dumps(json_output) function
- C. Fix the JSON syntax by modifying "attribures" to "attribures":
- D. Invoke a function yaml.loads(json._output ,decoder_"json")
Answer: B
NEW QUESTION # 140
Refer to the exhibit. A blade that is connected to FI-B fails to boot from a SAN LUN. The boot policy is configured to boot by using vHBA1 as the SAN Primary.
Which set of actions resolves the issue?
- A. Change vHBA1 to VSAN 20 in Service Profile.
Apply VMware Adapter Policy on vHBA1. - B. Set ESX01_B zone to VSAN 20.
Create a new vHBA and assign VSAN 20. - C. Set VSAN to 20 in vHBA_SAN_B Template.
Configure ESX01_B zone to VSAN 20. - D. Apply VMware Adapter Policy on vHBA1.
Change vHBA1 to VSAN 20 in Service Profile.
Answer: C
NEW QUESTION # 141
......
300-615 Questions Prepare with Learning Information: https://www.realexamfree.com/300-615-real-exam-dumps.html
Download 300-615 Mock Test Study Material: https://drive.google.com/open?id=1gcQKjkR6X8vIzN91YbPAMGBdq61xXeal
