[Nov-2024] Verified EMC Exam Dumps with D-PE-OE-23 Exam Study Guide
Best Quality EMC D-PE-OE-23 Exam Questions RealExamFree Realistic Practice Exams [2024]
NEW QUESTION # 137
An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?
- A. Configure the PowerEdge R440 PSU with 1+1 configuration
- B. Add the PowerEdge R420 PSU modules to the PowerEdge R440
- C. Order a new PSU specific to the existing PowerEdge R440
- D. Add the PowerEdge R430 PSU modules to the PowerEdge R440
Answer: C
NEW QUESTION # 138
A technician needs to initially configure a server from a bare metal condition in the following areas:
- Processor settings
- Disk configuration
- iDRAC network settings
The technician can only reboot once to achieve these tasks.
Where should the technician configure these settings? (Choose three.)
- A. Device Settings
- B. PERC Configuration Utility
- C. System BIOS
- D. iDRAC Settings
- E. PXE Settings
Answer: B,C,E
NEW QUESTION # 139
What is a difference between iDRAC Direct 2.0 in 14G and iDRAC Direct in 13G Dell EMC PowerEdge servers?
- A. Availability on certain low-end servers
- B. Speed of the connection
- C. Support on rack servers
- D. Sharing of iDRAC Direct port with OS
Answer: B
NEW QUESTION # 140
A technician deploy a new server in a datacenter and must install Microsoft Windows Server 2012 R2.
Which two steps are required to install the OS using the Lifecycle Controller? (Choose two.)
- A. Disable iDRAC virtual media
- B. Place OS media in DVD attached to server
- C. Configure Lifecycle Controller network settings
- D. Configure storage
- E. Restore server profile
Answer: B,D
NEW QUESTION # 141
A technician has a rack mount server with 20, 200 GB drives installed. The administrator needs three different RAID 5 virtual disks that are each 600 GB in size. All virtual disks must utilize the same set of physical disks.
How should the technician meet this requirement?
- A. Create three virtual disks that are each 600 GB in size
Assing these disks to the same disk group via Lifecycle Controller - B. Create a single disk group using 6 drives
Assign the virtual disks via the Lifecycle Controller - C. Create a virtual disk using 10 drives that are 600 GB in size
Split the remaining space into two virtual disks - D. Create three disk groups using 9 drives that are each 600 GB in size Add virtual disks to each disk group
Answer: C
NEW QUESTION # 142
A technician configures iDRAC on a new server for access on the management network. When accessing via telnet, the connection is refused. Network connectivity is a verified network. NO ports are blocked by any network devices.
Why is the telnet connection being refused?
- A. Telnet is NOT supported to access iDRAC.
- B. Telnet is NOT enabled by default on the iDRAC
- C. The iDRAC must be configured to allow the IP address of the technician's workstation.
- D. The telnet client must be configured to connect to port 8899 on the iDRAC
Answer: B
NEW QUESTION # 143
A technician wants to configure the iDRAC on a new server using the iDRAC Quick Sync 2 feature.
What is required to use this feature?
- A. OpenManage Mobile App installed on an Android or iOS device
- B. OpenManage Mobile App installed on a laptop
- C. Quick Sync enabled bezel
- D. iDRAC Enterprise license
Answer: A
NEW QUESTION # 144
Which operation should a technician perform to ensure configuration recovery if a server must be physically replaced?
- A. Back up the Server Profile to vFlash
- B. Back up and export the Server Profile to a network share
- C. Create and export a Server Configuration Profile
- D. View and export the current hardware inventory
Answer: A
NEW QUESTION # 145
What type of screwdriver is required to remove the processor heat sink module?
- A. Torque
- B. Hex
- C. Phillips
- D. Torx
Answer: D
NEW QUESTION # 146
Which is responsible for controlling the NVMe disks, when using a Paddle Card in a PowerEdge 15G server?
- A. HBA355
- B. H745
- C. S150
Answer: C
NEW QUESTION # 147
A technician is setting up a previously used Dell EMC PowerEdge server. Upon power up, the PERC alerts them to the presence of a foreign configuration. In the iDRAC storage section, the technician checks Foreign View. The foreign array configuration is the same as the configuration needed for the new project.
What is a recommended way to prepare the disks for the new project?
- A. Access the Ctrl+R utility, clear the foreign configuration, and set up array as needed
- B. Edit the foreign configuration and set it to Ready
- C. Import the foreign configuration and perform a full initialization
- D. Format the foreign configuration and clear the controller configuration
Answer: A
NEW QUESTION # 148
A server in an unattended remote site powers down unexpectedly. The technician assigned to the customer cannot arrive on-site until tomorrow. The customer needs the server back up and running today.
What should the technician do?
- A. Access the iDRAC interface and power the server on remotely
- B. Issue a Power Supply Unit reseat command using a remote CLI
- C. Use the RDP utility and power the server on remotely
- D. Log into the Lifecycle Controller and remotely power on the server
Answer: A
NEW QUESTION # 149
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.
What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Operating system not installed on remote server
- B. The server has been powered down
- C. The Virtual Console is disabled
- D. There are more than the maximum number of active sessions
Answer: B
NEW QUESTION # 150
A technician in Portland, Oregon has been asked to update the firmware on a server in Omaha, Nebraska. They will use an NFS server also located in Nebraska for serving patches that have been vetted by their security teams.
What two pieces of information does the technician need in order to access the NFS patch server from the Lifecycle Controller or iDRAC? (Choose two.)
- A. Username and password
- B. CHAP authentication credentials
- C. IP address or hostname
- D. Share name
Answer: A,D
NEW QUESTION # 151
A technician installs a NIC on a single CPU server. However, the NIC is not detected when they power on the server.
What should the technician verify to make sure that the NIC is detected correctly?
- A. System Setup is set to BIOS boot mode
- B. NIC driver is up to date
- C. NIC is installed in an expansion slot managed by the single CPU
- D. Network cable is plugged into the newly installed NIC
Answer: C
NEW QUESTION # 152
SPECIAL INSTRUCTIONS
The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the 'Review Case Study' icon shown below:
Case Study 5 - Refer to the Exhibit.
Backing up data from a Dell EMC Isilon cluster exceeds the company's backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.
Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.
The company's IT team is now looking for a method to increase the performance of their backups. After some investigations, you notice that the backup job quiesces the file system. This is creating lock contention issues on open files and not allowing users full access to data when the backup job runs.
What advice should be provided to the team to eliminate lock contention and allow full access to users?
- A. Enhance the backup strategy using snapshots for backups.
- B. Create a cron job to remove all locks before each backup.
- C. Add A100 Backup Accelerators and configure for three-way NDMP
- D. Stop using an NDMP-based backup strategy.
Answer: C
NEW QUESTION # 153
......
Authentic Best resources for D-PE-OE-23: https://www.realexamfree.com/D-PE-OE-23-real-exam-dumps.html
D-PE-OE-23 Test Engine Practice Exam: https://drive.google.com/open?id=1jNLz395WvOpMgyVgjam7apCVNf8Lku1n
