[Mar 08, 2026] Get New NCP-MCI-6.10 Certification Practice Test Questions Exam Dumps
Real NCP-MCI-6.10 Exam Dumps Questions Valid NCP-MCI-6.10 Dumps PDF
Nutanix NCP-MCI-6.10 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 97
An administrator is managing a4-node clusterwithdifferent hardware generations:
* Two G5 Nodes# 2 CPUs (12 cores), 1 SSD (1.92 TB), 2 HDDs (4 TB).
* Two G7 Nodes# 2 CPUs (16 cores), 2 SSDs (1.92 TB), 4 HDDs (4 TB).
The cluster will bedecommissioned from productionand used forDisaster Recovery (DR) purposeswithan RPO of 1 hour.
What is the best approach when replacing G5 nodes without impacting performance?
- A. New node must be G7 or G8.
- B. New node must have at least 2 SSDs.
- C. New node must be hybrid.
- D. New node must have 2 CPUs with 12 cores.
Answer: B
Explanation:
For optimal Disaster Recovery performance, new nodes must match or exceed the storage performance of existing nodes.
* Option A (New node must have at least 2 SSDs) is correct:
* Since the G7 nodes havetwo SSDs, replacing G5 nodes withat least 2 SSDsensuresconsistent SSD cache and performance.
* Option B is incorrect:
* G7 or G8 nodes may help, but storage performance is more critical for DR.
* Option C is incorrect:
* CPU core count does not impact DR storage performance as much as SSD capacity.
* Option D is incorrect:
* Hybrid nodes are already in use, but SSDs must match for performance balance.
References:
* Nutanix Hardware Guide#Choosing Nodes for Hybrid and DR Clusters
* Nutanix KB#Balancing Storage Across Different Hardware Generations
NEW QUESTION # 98
Refer to Exhibit:
An administrator is looking at thememory cluster runway diagramas shown in exhibit, in Prism Central. The environment hasthree hostswith the following configuration:
* CPU: 2x Intel Xeon Gold (8 cores, 2.6 GHz)
* RAM: 256 GB per host
* Storage: SSDs and HDDs
TheIntelligent Operations featurehas been active forone month, but no further configurations were applied.
What does the dotted red line mean?
- A. It is thedefault trend analysis static thresholdthat can be manually set.
- B. It is thecalculated memory oversubscription limitfor currently running VMs.
- C. It is themaximum memory the administrator can assign to VMs.
- D. It is theusable capacity based on cluster configuration options.
Answer: B
NEW QUESTION # 99
Which tool in Nutanix can be used to gather logs for troubleshooting and support?
- A. LCM (Life Cycle Manager)
- B. X-Ray
- C. NCC (Nutanix Cluster Check)
- D. Nutanix Move
Answer: C
NEW QUESTION # 100
Which Nutanix feature helps analyze and predict VM performance issues?
- A. Prism Pro X-Play
- B. Karbon
- C. Calm
- D. AHV Turbo
Answer: A
NEW QUESTION # 101
An administrator needs to configure NTP on Prism Central running on a Hyper-V cluster.
How should the administrator complete this task?
- A. Add a server with DNS hostname.
- B. Add an external NTP server.
- C. Add the IP of the Domain Controller.
- D. Add the DNS server IP.
Answer: B
Explanation:
Nutanix platform timing guidelines state that Prism Central requires accurate clock synchronization to ensure proper authentication, event logging, certificate validation, and cluster orchestration. The documentation details that "NTP must be configured to a reachable, reliable time source, and best practice is to configure Prism Central to use an external, independent, standards-based NTP server." Using a Domain Controller is acceptable only if the DC itself is properly synchronized with an authoritative external NTP source, but Nutanix strongly recommends specifying the external source directly in Prism Central for consistency across hypervisors and multi-cluster environments. Adding a DNS server IP is not time-related. Adding a hostname is valid only if it resolves to a functioning NTP server, but the question requires the correct method, not the acceptable syntax.
Therefore, selecting an external NTP server is the correct and recommended configuration.
NEW QUESTION # 102
Which configuration option allows a VM to be powered on before the rest of the VMs when starting a host?
- A. Recovery plan
- B. High Availability
- C. Agent VM
- D. Host affinity
Answer: B
Explanation:
Nutanix High Availability (HA) determines the order in which VMs are restarted after a host failure or during host start sequences. Documentation states:
"VM restart priority levels defined in the High Availability policy determine which VMs are restarted first during node recovery or host power-on events." Nutanix HA allows administrators to assign priority levels such as High, Medium, or Low. The system ensures VMs with higher priority power on before other workloads.
Host affinity simply pins VMs to physical hosts and does not control boot order. Agent VMs are infrastructure components and not involved in workload priority. Recovery plans apply only to DR workflows, not standard host restart behavior.
Thus, the correct answer is High Availability.
NEW QUESTION # 103
What guest customization options are available when creating a VM template?
- A. Bash, Powershell
- B. Python, YAML
- C. None, guest customization is not supported in Nutanix templates.
- D. Sysprep, Cloud-init, Custom Script, Guided Script
Answer: D
Explanation:
Guest customization options allow administrators to automate OS configuration during VM deployment from a template.
* Option A (Sysprep, Cloud-init, Custom Script, Guided Script) is correct:
* Sysprep(for Windows) andCloud-init(for Linux) enablecustom OS configurations.
* Custom Scriptscan be used foradvanced automation.
* Options B and C are incorrect:
* Bash, Powershell, Python, and YAMLcan be used in automation, but theyare notguest customization options in VM templates.
* Option D is incorrect:
* Guest customization is fully supportedin Nutanix templates.
References:
* Nutanix VM Deployment Guide#Using Cloud-Init and Sysprep for Guest Customization
* Nutanix KB#Automating VM Deployments with Guest Customization
NEW QUESTION # 104
An administrator has been tasked with justifyingwhy Nutanix Disaster Recoverywas chosen for amulti-tier application spanning multiple business units.
What is the most efficient way to organize and manage the workloads?
- A. Utilize RESTful APIs to script creation of Recovery Plans
- B. Utilize a VM naming schema that allows sorting
- C. Utilize a 1:10 ratio of Recovery Plan to VMs
- D. Utilize Categories to organize VMs in Recovery Plans
Answer: D
Explanation:
Nutanix Categories allow administrators to group related VMs, making Disaster Recovery (DR) planning easier.
* Option B (Utilize Categories to organize VMs in Recovery Plans) is correct:
* Categories help group VMsbased on application tiers(e.g.,database, middleware, web servers).
* This ensuresorderly failoverwhile maintaining application dependencies.
* Option A (Naming schema) is incorrect:
* Naming conventions help, but theydo not provide functional organizationin recovery plans.
* Option C (1:10 Recovery Plan to VMs) is incorrect:
* The ratio depends onbusiness requirements, not a fixed number.
* Option D (RESTful APIs) is incorrect:
* Automation is useful, butit does not replace proper VM grouping via categories.
References:
* Nutanix Disaster Recovery Guide #Using Categories for DR Management
* Nutanix KB #Organizing VMs for Disaster Recovery Planning
NEW QUESTION # 105
An administrator recently attempted to enable Data-in-Transit Encryption on a scale-out Prism Central cluster to ensure service-level traffic is encrypted between cluster nodes. After attempting to enable the feature, it did not function because of firewall restrictions.
Which CVM-specific port must be allowed through the firewall for Data-in-Transit Encryption?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Data-in-Transit Encryption for Prism Central and CVMs requires specific internal communication ports to be open. Nutanix internal component documentation states:
"Port 2020 is used by the Nutanix encryption service for encrypted CVM-to-CVM communication during Data-in-Transit Encryption operations." This port is essential for establishing secure tunnels between control-plane services. Ports 2009 and 2010 are used by other CVM services (e.g., Stargate, Curator coordination) but not for transport encryption. Port 9440 is for Prism UI/API traffic, and while it must be accessible for management, it does not enable encrypted back- end service traffic.
Thus, the administrator must ensure that port 2020 is permitted to enable Data-in-Transit Encryption functionality.
NEW QUESTION # 106
After upgradingPrism Central from PC2022.1 to PC2024.1, an administrator isunable to log inwith theirIAM domain account.
What is the first troubleshooting step the administrator should take?
- A. Validate the trusted signing certificate of the organization.
- B. Log in with a local admin account.
- C. Ensure port 9441 is open in the firewall.
- D. Ping the Domain Controller from the CVM.
Answer: B
Explanation:
After a Prism Central upgrade, IAM authentication settings may require reconfiguration.
* Option D (Log in with a local admin account) is correct:
* If IAM authentication fails, thelocal admin account must be usedto check domain settings.
* Option A (Ping the Domain Controller) is incorrect:
* Network connectivity is important, but theissue is likely related to IAM settings, not network reachability.
* Option B (Check firewall port 9441) is incorrect:
* Port 9441 is used forSSO authentication, butport issues usually result in login delays, not complete failures.
* Option C (Validate signing certificate) is incorrect:
* While certificates can cause issues,local admin login should always work.
References:
Nutanix KB #Troubleshooting IAM Login Issues After a Prism Central Upgrade Nutanix Documentation #Managing User Authentication and IAM Integration
NEW QUESTION # 107
Which two actions occur by default on a node that is placed inMaintenance Mode? (Choose two.)
- A. Non-migratable VMs are powered off and restarted on other hosts in the cluster.
- B. Non-migratable VMs are powered off.
- C. All eligible VMs on the host are migrated to other hosts in the cluster.
- D. All eligible VMs on the host are powered off.
Answer: B,C
Explanation:
When a node is placed intoMaintenance Mode, Nutanix follows a structured process to ensureservice continuity and data integrity.
* Option B (All eligible VMs on the host are migrated to other hosts) is correct:
* Live Migration automatically moves VMs to other hoststo avoid downtime.
* This ensures workloads remain operational during maintenance.
* Option D (Non-migratable VMs are powered off) is correct:
* Some VMs, such as those usingGPU pass-through or local storage dependencies,cannot be live-migrated.
* These VMsmust be powered offbefore placing the host into Maintenance Mode.
* Option A is incorrect:
* Non-migratable VMs are not automatically restarted on other hosts-they remain powered off until manually restarted.
* Option C is incorrect:
* Eligible VMs are live-migrated, not powered off.
References:
* Nutanix AHV Best Practices#Understanding Maintenance Mode Behavior
* Nutanix KB#VM Migration and Power-Off Scenarios in Maintenance Mode
NEW QUESTION # 108
An administrator wants to live-migrate a vGPU-enabled VM from one host to another within the same cluster.
What requirements must be met before initiating the migration?
- A. The VM must be configured as an agent VM.
- B. The target host has sufficient resources to support the VM.
- C. The host affinity for the VM must be to a host.
- D. The vGPU profile needs to be changed.
Answer: B
Explanation:
The Nutanix AHV virtualization guide explains that vGPU-enabled VMs can be live migrated only when the destination host contains compatible GPU hardware and has available vGPU capacity matching the profile assigned to the VM. The documentation states that the VM must have "adequate and equivalent GPU resources on the target host" for migration to proceed. Host affinity is a limiting factor and not a requirement.
Agent VMs are not designed to be migrated. Changing the vGPU profile is not necessary as long as the target host supports the currently assigned profile. Therefore, ensuring the destination host has sufficient compatible resources is the required condition.
NEW QUESTION # 109
Which networking component in AHV is responsible for providing network connectivity to virtual machines?
- A. Controller VM (CVM)
- B. Virtual Switch (vSwitch)
- C. Nutanix Files
- D. RDMA
Answer: B
NEW QUESTION # 110
Refer to Exhibit:
An administrator is looking at thememory cluster runway diagramas shown in exhibit,in Prism Central. The environment hasthree hostswith the following configuration:
* CPU: 2x Intel Xeon Gold (8 cores, 2.6 GHz)
* RAM: 256 GB per host
* Storage: SSDs and HDDs
TheIntelligent Operations featurehas been active forone month, but no further configurations were applied.
What does the dotted red line mean?
- A. It is thedefault trend analysis static thresholdthat can be manually set.
- B. It is theusable capacity based on cluster configuration options.
- C. It is themaximum memory the administrator can assign to VMs.
- D. It is thecalculated memory oversubscription limitfor currently running VMs.
Answer: B
Explanation:
hePrism Central Memory Cluster Runway Diagramprovides insights into memory usage trends, predicting how long the cluster can sustain workloads before exhausting resources.
* Thesolid blue arearepresents theactual memory consumption over time.
* Thedotted red linerepresents theeffective memory capacity limitbased on the cluster's current configuration.
Analyzing the Dotted Red Line
Thedotted red line is labeled "Effective Capacity: 503.22 GiB", which means:
* It is the totalusable memory capacityin the cluster after consideringhypervisor overhead, redundancy settings, and failover capacity.
* This value isnot a hard limitbut an indication ofthe available memory before potential performance issues occur.
Evaluating the Answer Choices
#(A) It is the default trend analysis static threshold that can be manually set.(Incorrect)
* Thedotted red line is not a static thresholdthat an administrator can manually configure.
* Trend analysis in Prism isdynamicand based on workload history and projections.
#(B) It is the maximum memory the administrator can assign to VMs.(Incorrect)
* Administrators canoversubscribememory beyond the dotted red line if memory overcommitment is enabled.
* However, oversubscribing memory beyondeffective capacitymay impact performance.
#(C) It is the calculated memory oversubscription limit for currently running VMs.(Incorrect)
* The dotted red linedoes not represent oversubscription limits.
* Memory oversubscription depends onhypervisor memory ballooning, compression, and swapping mechanisms, which are not directly shown here.
#(D) It is the usable capacity based on cluster configuration options.(Correct Answer)
* Thedotted red line (503.22 GiB)represents theactual usable memory availablein the cluster after factoring in system overhead.
* This value is determined by:
* Total physical memory (256 GB per host × 3 hosts = 768 GB)
* Memory reserved for hypervisor and system processes
* Cluster failover and redundancy settings
* Intelligent Operations capacity analysis
Multicloud Infrastructure References & Best Practices
* Prism Central's "Runway" featureprovidesAI-driven trend analysisfor memory, CPU, and storage capacity.
* Theeffective capacity limithelps administrators makeproactive scaling decisionsbefore resources become critical.
* To increase thememory runway, administrators can:
* OptimizeVM memory allocation.
* Addmore hoststo the cluster.
* Enablememory deduplication and compression (if available).
NEW QUESTION # 111
Which feature allows a Nutanix administrator to perform non-disruptive upgrades of software and firmware?
- A. Data Replication
- B. One-Click Upgrade
- C. Pulse Monitoring
- D. Prism Central
Answer: B
NEW QUESTION # 112
An administrator has configured AHV Metro with Witness and wants to document different failover scenarios.
As part of the failover tests, the following link losses were simulated:
* Loss of connectivity between the two metro clusters
* Loss of connectivity between the primary cluster and Prism Central
However, Prism Central and the recovery cluster remain connected.
Which two system behaviors are expected? (Choose two.)
- A. Guest VM I/O operations pause until connectivity between the primary and recovery clusters or the primary cluster and Prism Central is restored.
- B. Guest VMs continue to run on the primary cluster.
- C. Guest VMs fail over automatically to the recovery cluster.
- D. Guest VM I/O operations pause until connectivity between the primary and recovery clusters or any of the clusters and Prism Central is restored.
Answer: B,D
Explanation:
Nutanix AHV Metro Availability with Witness uses cluster-to-cluster heartbeats and Witness arbitration to determine failover events. Internal design notes state:
"In a Metro Availability scenario, if the primary cluster loses connectivity to the secondary cluster but remains operational, it continues serving I/O to the VMs. No automatic failover occurs unless the cluster is determined to be down." Also:
"I/O pauses only occur when the cluster cannot reach either the peer cluster or the Witness/Prism Central arbitration source." Applying this to the scenario:
* Both metro clusters lose connectivity with each other.
* The primary cluster also loses connectivity to Prism Central.
* The recovery cluster remains connected to Prism Central.
Since the primary cluster cannot reach the recovery cluster nor Prism Central, the arbitration path is lost. This triggers the "I/O stall for safety" condition described as:
"I/O will be paused until the cluster regains quorum or arbitration to ensure against split-brain conditions." But because the primary clusteris still runningand is not declared failed (just isolated), VMs continue running and I/O is paused only as long as arbitration is unreachable.
Thus:
* Option B is correct because it covers loss of connectivity to either peer or Prism Central.
* Option C is correct because VMs do continue running; only I/O is paused to prevent inconsistency.
* Automatic failover only happens when Witness declares the primary unreachable by quorum rules, which is not the case here since only one side can see the Witness.
NEW QUESTION # 113
A Linux VM provides services for multiple clients on a single large subnet. The number of clients varies over time. The clients consist of VMs and physical systems.
The administrator observed network performance problems on the Linux VM when going over 2,000 client connections.
Which action can be performed to mitigate the issue?
- A. Configure vNIC to operate in trunk mode.
- B. Enable RSS VirtIO-Net Multi-Queue.
- C. Add multiple vNICs to the virtual machine.
- D. Change VirtIO-Net vNIC to e1000 model.
Answer: B
Explanation:
Nutanix AHV networking documentation explains that high-connection-count workloads can saturate a single network queue, causing receive-side bottlenecks. VirtIO-Net supports Multi-Queue with Receive-Side Scaling (RSS), allowing the VM to distribute packet processing across multiple vCPUs. The documentation states,
"Enabling RSS Multi-Queue improves performance for workloads handling a large number of simultaneous network flows by parallelizing packet handling." Trunk mode does not solve per-queue packet processing limitations. Adding vNICs is not recommended because the bottleneck is at the queue level, not the number of interfaces. Using the e1000 adapter results in lower performance compared to VirtIO and is discouraged. Therefore, enabling RSS Multi-Queue is the correct performance optimization for a VM handling thousands of client connections.
NEW QUESTION # 114
An administrator is trying toconfigure Metro Availabilitybetween NutanixESXi-based clusters. However, theCompatible Remote Sitesscreen does not list all required storage containers.
Which two reasons could be a cause for this issue? (Choose two.)
- A. The remote site storage container has compression enabled.
- B. The destination storage container is not empty.
- C. Source and destination hardware are from different vendors.
- D. Both storage containers must have the same name.
Answer: B,D
Explanation:
Metro Availability in Nutanix requires that the primary and secondary storage containers be configured identicallyto ensuredata replication consistency.
Option C (The destination storage container is not empty) is correct:
Theremote storage container must be emptybefore Metro Availability can be enabled.
Existing data can cause conflictsand prevent it from appearing in the "Compatible Remote Sites" list.
Option D (Both storage containers must have the same name) is correct:
Metro Availability requires thatstorage containers have identical names across clusters.
If namesdo not match, thestorage container will not be listed as compatible.
Option A is incorrect: Metro Availability works regardless of hardware vendor differences.
Option B is incorrect:Compression does not affect compatibilitybut may impact performance.
References:
Nutanix Metro Availability Deployment Guide
Nutanix Best Practices forConfiguring Remote Sites for Metro Availability Nutanix KB #Troubleshooting Storage Container Issues in Metro Availability
NEW QUESTION # 115
An administrator would like to plan for new project-related growth.
New project workload requirements have been included for a cluster named ClusterXYZ:
2 Medium Sized SQL Servers
10 VMs with 16Gb RAM, 4 vCPU, 100GB Storage
Which two additional information items should be added to the capacity planning scenario to provide a proper capacity runway expectation? (Choose two.)
- A. Change in Demand percentage
- B. Existing cluster hardware specifications
- C. Date(s) workload(s) will be added
- D. Storage compression ratio(s) for new workload
Answer: C,D
NEW QUESTION # 116
After addingnew workloads, theOverall Runwayis nowbelow 365 days, but thescenario still shows the cluster is in good shape.
Why?
- A. Because there are recommended resources.
- B. Because the Target is 1 month.
- C. Because new workloads are sustainable.
- D. Because Storage Runway is still good.
Answer: C
Explanation:
A cluster runway below 365 days does not necessarily indicate an issue if Intelligent Operations determines that workloads are sustainable.
* Option B (Because new workloads are sustainable) is correct:
* Nutanixanalyzes resource trendsand marks clusters as healthyif new workloads are within projected capacity.
* Option A (Storage Runway is still good) is incorrect:
* Storage isone component, butCPU and memoryalso affect runway calculations.
* Option C (Recommended resources) is incorrect:
* Recommendations help optimize capacity, butdo not define cluster health.
* Option D (Target is 1 month) is incorrect:
* The scenario's target window does not impact the actual runway calculation.
References:
* Nutanix Prism Central Guide #Capacity Planning & Runway Analysis
* Nutanix KB #Understanding Capacity Runway and Workload Sustainability
NEW QUESTION # 117
An administrator is experiencing performance issues within a VM and believes that more vCPU should be added to the specific VM. The cluster as a whole appears to be performing well.
Which two metrics should be analyzed to determine if adding more vCPUs is warranted? (Choose two.)
- A. VM CPU Usage
- B. Host Memory Swap Out Rate
- C. Host CPU usage
- D. VM CPU Ready Time
Answer: A,D
Explanation:
The Nutanix ECA course provides guidance on performance monitoring and troubleshooting for VMs, including metrics to analyze when determining whether additional vCPUs are needed. The scenario involves a VM experiencing performance issues, with the cluster performing well overall, suggesting the issue is VM- specific.
Extract from Nutanix Enterprise Cloud Administration (ECA) Course Documents:
* Module: Performance Monitoring, Section: VM Performance Metrics"To determine if a VM requires additional vCPUs, analyze VM CPU Usage and VM CPU Ready Time. High CPU Usage indicates the VM is under heavy load, while high CPU Ready Time suggests the VM is waiting for CPU resources, both justifying additional vCPUs."
* Module: Troubleshooting, Section: VM Performance Issues"When a VM experiences performance issues, VM CPU Usage and VM CPU Ready Time are critical metrics. CPU Usage shows demand, while CPU Ready Time indicates contention or scheduling delays, helping determine if more vCPUs are warranted." Explanation of Options:
* A. VM CPU UsageThis is correct. VM CPU Usage measures the percentage of CPU resources the VM is consuming. High CPU Usage (e.g., consistently above 80-90%) indicates that the VM is under heavy load and may benefit from additional vCPUs to handle the workload. The ECA course emphasizes:"VM CPU Usage is the primary metric to assess whether a VM's CPU allocation is sufficient for its workload."
* B. VM CPU Ready TimeThis is correct. VM CPU Ready Time measures the time a VM is ready to run but waiting for CPU resources from the hypervisor due to contention or oversubscription. High CPU Ready Time (e.g., above 5-10%) suggests that the VM is not getting enough CPU cycles, and adding vCPUs could alleviate the issue. The ECA course notes:"High VM CPU Ready Time indicates CPU contention, often resolved by adding vCPUs or optimizing resource allocation."
* C. Host Memory Swap Out RateThis is incorrect. Host Memory Swap Out Rate indicates memory pressure on the host, causing memory pages to be swapped to disk. While this can affect VM performance, it is unrelated to CPU performance and does not justify adding vCPUs. The ECA course states:"Host Memory Swap Out Rate is relevant for memory-related issues, not CPU allocation decisions."
* D. Host CPU UsageThis is incorrect. Host CPU Usage measures the overall CPU utilization of the host, not the specific VM. Since the cluster is performing well overall, high Host CPU Usage is unlikely, and it does not directly indicate whether the VM needs more vCPUs. The ECA course clarifies:"Host CPU Usage is a cluster-wide metric and less relevant for diagnosing VM-specific CPU performance issues." Additional Context from ECA:
* Performance Monitoring Tools: In Prism Element or Prism Central, VM CPU Usage and CPU Ready Time can be monitored underVM > Monitoror through dashboards. These metrics provide insight into the VM's CPU demand and contention.
* Adding vCPUs: The ECA course advises caution when adding vCPUs, as over-allocation can increase CPU Ready Time due to scheduling overhead. However, if both CPU Usage and Ready Time are high, adding vCPUs is justified.
Supporting Reference from Web Results:
The Nutanix Bible (https://www.nutanix.com/go/the-nutanix-bible) supports:"For VM performance issues, analyze VM CPU Usage and CPU Ready Time to determine if additional vCPUs are needed, as these metrics directly indicate CPU demand and contention."
NEW QUESTION # 118
An administrator has configuredAHV Metro Availability with Witnessand is testing failover scenarios.
During testing, the administratordisconnects the primary and recovery clustersbutPrism Central remains connected to the recovery site.
What are two expected system behaviors? (Choose two.)
- A. Guest VMs failover automatically to the recovery cluster.
- B. Guest VM I/O operations pause (freeze) until connectivity is restored.
- C. Guest VM I/O operations pause (freeze) until connectivity between Prism Central and the primary site is restored.
- D. Guest VMs continue to run on the primary cluster.
Answer: A,B
Explanation:
When connectivity between Metro clusters is lost, Nutanix Metro Availability ensures data integrity using Witness for automatic failover.
* Option A (Guest VM I/O operations pause until connectivity is restored) is correct:
* Metro Availability enforces data consistency, so I/O operationspauseuntil failover is confirmed.
* Option C (Guest VMs failover automatically to the recovery cluster) is correct:
* TheWitness VM detects the failureand initiates anautomatic failoverto the secondary cluster.
* Option B is incorrect:
* Prism Centraldoes not control VM failover in Metro Availability.
* Option D is incorrect:
* The primary cluster isunreachable, so VMs cannot continue running there.
References:
Nutanix Metro Availability Guide#How Witness Handles Failover Scenarios Nutanix KB#I/O Freezing and Failover Behavior in Metro Clusters
NEW QUESTION # 119
Which predefined view in Prism Central's Intelligent Operations should be used to determine which VM is consuming excessive resources and causing performance issues for others?
- A. Overprovisioned VMs List
- B. Constrained VMs List
- C. Bully VMs List
- D. Inactive VMs List
Answer: C
Explanation:
TheBully VMs List (Option C)in Prism Central'sIntelligent OperationsidentifiesVMs consuming excessive CPU, memory, or storage, which negatively affects other VMs.
* Option A (Inactive VMs List)is used foridentifying unused VMsbut does not detect performance issues.
* Option B (Overprovisioned VMs List)helps identifyVMs with excessive allocated resources, but it does not focus on live performance impact.
* Option D (Constrained VMs List)highlightsVMs suffering from resource contention, not those causing it.
References:
* Nutanix Prism Central #Intelligent Operations and Performance Tuning
* Nutanix KB #Identifying and Managing Resource-Hogging VMs
NEW QUESTION # 120
An administrator started anLCM upgrade of the AHV hostsbut realized that theupgrade would exceed the planned maintenance window.
Which feature should be leveraged to prevent additional updates from occurring?
- A. Cancel the LCM tasks via theErgon command line (ecli).
- B. RestartGenesison the cluster to restart the LCM service.
- C. Run thelcm_task_cleanup.pyscript.
- D. Use theStop Update feature in LCM.
Answer: D
Explanation:
When performing aLife Cycle Manager (LCM) upgrade, therecommended way to stop the process is to use the "Stop Update" feature in LCM (Option D).
* Option A (Cancel via Ergon ecli)is not a recommended approach since manually interfering with running tasks can cause inconsistencies.
* Option B (lcm_task_cleanup.py script)is used for post-upgrade cleanup but does not stop ongoing updates.
* Option C (Restarting Genesis)does not stop an LCM upgrade and can cause instability.
References:
* Nutanix Life Cycle Manager (LCM) User Guide
* Nutanix KB:Best Practices for Stopping and Restarting LCM Tasks
* Nutanix Prism Central #LCM Feature Documentation
NEW QUESTION # 121
An administrator wants toenable application discoveryon aNutanix clusterto monitor applications. APrism Central instanceis alreadyconfigured with sufficient CPU and memory.
What other prerequisites must be met before enabling application discovery? (Choose two.)
- A. Internet connection
- B. API key and key ID
- C. Network controller is enabled
- D. Sufficient Prism Central VM resources
Answer: A,D
Explanation:
Application discovery in Prism Central requires sufficient Prism Central resources and an active internet connection to retrieve application signatures.
* Option A (Sufficient Prism Central VM resources) is correct:
* Prism Central needsadequate CPU and memoryto process application signatures and discovery data.
* Option B (Internet connection) is correct:
* Application discovery depends on Nutanix'scloud databaseto recognize application patterns.
* Option C (API key and key ID) is incorrect:
* API keys are not requiredfor automatic application discovery.
* Option D (Network controller enabled) is incorrect:
* Application discoverydoes not depend on a network controller feature.
References:
* Nutanix Prism Central Guide #Enabling and Using Application Discovery
* Nutanix KB #Requirements for Application Discovery in Prism Central
NEW QUESTION # 122
......
NCP-MCI-6.10 Exam Dumps - PDF Questions and Testing Engine: https://www.realexamfree.com/NCP-MCI-6.10-real-exam-dumps.html
Latest NCP-MCI-6.10 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=1nYN_rIaXv21ZrUxPJq6WqDHuZ82KfAYV
