Guaranteed Accomplishment with Newest Oct-2024 FREE Fortinet FCP_FMG_AD-7.4
Use Valid New Free FCP_FMG_AD-7.4 Exam Dumps & Answers
Fortinet FCP_FMG_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION # 19
What is a characteristic of the FortiManager high availability (HA) feature?
- A. Each cluster member must be upgraded manually, starting with the primary unit.
- B. When a secondary unit is removed, FortiManager updates the managed devices using TCP port 5199.
- C. All secondary units must be in the same network as the primary unit.
- D. The primary unit synchronizes all configuration revision with the seconday units.
Answer: D
NEW QUESTION # 20
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)
- A. The Security Fabric license, group name, and password are required for the FortiManager Security Fabric integration.
- B. The Security Fabric settings are part of the device-level settings.
- C. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices.
- D. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices.
Answer: B,C
NEW QUESTION # 21
Exhibit.
An administrator would like to create three ADOMs on FortiManager with different access levels based on departments. What two conclusions can you draw from the design shown in the exhibit? (Choose two.)
- A. The FortiManager administrator must set the ADOM device mode to Advanced
- B. Policies and objects databases can be shared between the Financial and HR ADOMs.
- C. An administrator with the super user profile can access all theVDOMs.
- D. The administrator must configure FortiManager in workspace normal mode.
Answer: A,C
NEW QUESTION # 22
An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect? (Choose two.)
- A. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.
- B. FortiManager will temporarily change the status of the referenced firewall policy to disabled.
- C. FortiManager will disable the status of the address object until the changes are installed.
- D. FortiManager will not allow the administrator to delete a referenced address object until they lock the ADOM.
Answer: A,D
Explanation:
When operating in workspace mode on FortiManager 7.4, the administrator must understand how object references and deletions work:
* Option C- "FortiManager will not allow the administrator to delete a referenced address object until they lock the ADOM":In workspace mode, all changes are managed within an Administrative Domain (ADOM) scope. When an object (like an address object) is referenced in a policy, FortiManager prevents its deletion to maintain configuration integrity. The ADOM must be locked by the administrator to make changes to any referenced objects. This locking mechanism ensures that no unintended deletions or changes occur that could disrupt the policies or configuration.
* FortiManager Reference: "In workspace mode, changes to objects or policies require the ADOM to be locked. If an object is referenced, you must lock the ADOM before deleting or modifying the object." (FortiManager 7.4 Administration Guide, Section on Workspace Mode and ADOM Management)
* Option D- "FortiManager will replace the deleted address object with the none address object in the referenced firewall policy":If the administrator attempts to delete an address object that is currently referenced by a firewall policy, FortiManager will replace the deleted object with the 'none' address object. This is done to maintain the policy structure and avoid policy corruption due to a missing reference. This behavior ensures that the firewall policy remains syntactically correct, even though the specific address object is no longer in use.
* FortiManager Reference: "When a referenced object is deleted, FortiManager will replace it with a 'none' object in the policy. This behavior is to ensure the integrity and continuity of the policy configurations." (FortiManager 7.4 Administration Guide, Object Management and Policy Handling in Workspace Mode)
NEW QUESTION # 23
An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect? (Choose two.)
- A. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.
- B. FortiManager will not allow the administrator to delete a referenced address object until theylockthe ADOM.
- C. FortiManager will temporarily change the status of the referenced firewall policy to disabled.
- D. FortiManager will disable the status of the address object until the changes are installed.
Answer: A,B
NEW QUESTION # 24
Refer to the exhibit.
What percent of the available RAM is being used by the process in charge of downloading the web and email filter databases from the public FortiGuard servers?
- A. 4.1
- B. 2.9
- C. 3.1
- D. 1.5
Answer: B
Explanation:
In the exhibit, the FortiManager CLI output displays the results of thetopcommand, which shows system processes, CPU usage, and memory (RAM) usage. We are specifically looking for the process responsible for downloading theweb and email filter databasesfrom the public FortiGuard servers. This process is typically handled by thefgdlinkdprocess.
Key information from the output:
* Thefgdlinkdprocess is listed with aPID of 1463.
* The%MEMcolumn shows that this process is using2.9%of the available RAM.
Evaluation of Options:
* A. 2.9: This iscorrect. Thefgdlinkdprocess, which handles the web and email filter database downloads, is using2.9%of the available memory, as indicated in the%MEMcolumn.
* B. 3.1: This is incorrect. The3.1%memory usage belongs to thefwmsvrdprocess, not the fgdlinkd process.
* C. 1.5: This is incorrect. The1.5%memory usage belongs to thefclinkdprocess, not the fgdlinkd process.
* D. 4.1: This is incorrect. The4.1%memory usage belongs to thefgdsvrprocess, not the fgdlinkd process.
NEW QUESTION # 25
Exhibit.
Which two statements about the output are true? (Choose two.)
- A. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.
- B. The latest revision history for the managed FortiGate does not match the device-level database.
- C. The latest revision history for the managed FortiGate does match the FortiGate running configuration.
- D. Configuration changes directly made on FortiGate have been automatically updated to the device-level database.
Answer: B,C
NEW QUESTION # 26
What is the purpose of ADOM revisions?
- A. To save the current state of the whole ADOM
- B. To save the FortiManager configuration in the System Checkpoints
- C. To revert individual policy packages and device-level settings for a managed FortiGate
- D. To save the current state of all policy packages and objects for an ADOM
Answer: D
NEW QUESTION # 27
Which API method is used to create objects or overwrite existing ones?
- A. Set
- B. Add
- C. Exec
- D. Update
Answer: A
Explanation:
In the context of the FortiManager JSON API, thesetmethod is used tocreate new objectsoroverwrite existing ones. The API allows administrators to manage FortiManager and its associated devices by automating tasks like configuration changes, policy updates, and object creation.
Explanation of Options:
* A. Set:
* This istrue. Thesetmethod is used to create a new object if it does not exist or overwrite an existing object if it already exists. This method is frequently used in API requests to configure settings and apply changes on FortiManager.
* B. Add:
* This isfalse. Theaddmethod is used to add new objects without overwriting any existing ones. It is used when you want to create a new entry and ensure it doesn't conflict with or replace an existing object.
* C. Exec:
* This isfalse. Theexecmethod is used to execute specific actions or commands, rather than creating or modifying objects. This is typically used for actions like running scripts or executing operational commands on FortiManager or FortiGate.
* D. Update:
* This isfalse. While "update" might seem relevant, FortiManager's API does not specifically use an "update" method for modifying or creating objects. Thesetmethod serves that function by both creating new objects and overwriting existing ones.
NEW QUESTION # 28
Refer to the exhibit.
What can you conclude from the failed installation log shown in the exhibit?
- A. Policy ID 2 is installed in the disabled state.
- B. Policy ID 2 is installed without a source address.
- C. Policy ID 2 will not be installed.
- D. Policy ID 2 is installed without the remote user student.
Answer: D
NEW QUESTION # 29
In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state?
- A. The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
- B. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device.
- C. Reconfigure the primary device to remove the peer IP of the failed device.
- D. Reboot the failed device to remove its IP from the primary device.
Answer: B
Explanation:
When a secondary FortiManager device fails in HA manual mode, an administrator must manually promote one of the working secondary devices to the primary role and reboot the old primary device to remove the peer IP of the failed device. This ensures the HA configuration is updated correctly, and the network remains resilient.
Options A, B, and D are incorrect because:
* A suggests the transition is transparent, which is true only in automatic mode, not in manual mode.
* B and D imply simpler steps that do not fully address the HA reconfiguration process in manual mode.
FortiManager References:
* Refer to FortiManager 7.4 High Availability (HA) Configuration Guide: Manual Mode Configuration and Failover Procedures.
NEW QUESTION # 30
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- B. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
- C. During discovery. FortiManager sets the NATed device IP address on FortiGate.
- D. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
Answer: D
NEW QUESTION # 31
Refer to the exhibit which shows the Download Import Report.
Why is FortiManager failing to import firewall policy ID 1?
- A. Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager.
- B. Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager
- C. Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortlGate.
- D. Policy ID 1 has an address object that already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.
Answer: C
NEW QUESTION # 32
An administrator configures a new OSPF area on FortiManager and has not yet pushed the changes to the managed FortiGate device. In which database will the configuration be saved?
- A. Revision history database
- B. Configuration-level database
- C. Device-level database
- D. ADOM-level database
Answer: C
Explanation:
When an administrator configures a new OSPF area on FortiManager but has not yet pushed the changes to the managed FortiGate device, the configuration is saved in theDevice-level database.
Explanation of Options:
* A. Device-level database:
* This istrue. When changes are made to a device's configuration on FortiManager, they are saved in theDevice-level database. This database stores the configuration for individual managed devices. The configuration changes remain here until they are pushed to the actual FortiGate device.
* B. ADOM-level database:
* This isfalse. The ADOM-level database holds configurations related to the entire ADOM (Administrative Domain), such as global settings that apply to all devices within the ADOM, rather than configurations specific to individual devices.
* C. Configuration-level database:
* This isfalse. The term "Configuration-level database" is not typically used in FortiManager terminology. Changes are stored in the device-level database and are applied when pushed to the FortiGate.
* D. Revision history database:
* This isfalse. The revision history database keeps track of previous versions of configurations after they have been pushed to the FortiGate device. It does not store unsaved or pending configurations that have not yet been applied to the device.
NEW QUESTION # 33
Refer to the exhibit.
What percent of the available RAM is being used by the process in charge of downloading the web and email filter databases from the public FortiGuard servers?
- A. 4.1
- B. 2.9
- C. 3.1
- D. 1.5
Answer: B
NEW QUESTION # 34
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate license information
- B. FortiGate uptime
- C. FortiGate IPS version
- D. FortiGate configuration checksum
Answer: C,D
NEW QUESTION # 35
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- B. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
- C. During discovery. FortiManager sets the NATed device IP address on FortiGate.
- D. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
Answer: D
Explanation:
When adding a FortiGate device to FortiManager that is operating behind a NAT device, and the FortiManager NATed IP address is configured under the system administration settings, FortiManager will set the FortiManager NATed IP address on the FortiGate device during the discovery process. This ensures that the FortiGate knows how to reach the FortiManager through the NAT device.
Options A, B, and C are incorrect because:
* Ais incorrect because the discovery process also requires knowing the NATed IP to establish a connection, not just the serial number.
* Bis incorrect because FortiManager does not set the NAT device's IP address on the FortiGate.
* Cis incorrect because it implies that the NAT device IP is set on FortiGate, which is not the expected outcome.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Device Discovery and Management with NAT.
NEW QUESTION # 36
Exhibit.
What is true about the objects highlighted in the image?
- A. They can be used as variables in scripts.
- B. They can be set to optional or required.
- C. They cannot be created in the global database ADOM.
- D. They are available across all ADOMs by default.
Answer: A
Explanation:
The objects highlighted in the image (DMZ_SUBNET, ISP1_SUBNET, LAN_SUBNET) aremetadata variables.
* C.They can be used as variables in scripts.
* These metadata variables are placeholders that can be used in FortiManager scripts to dynamically insert specific values, enabling script flexibility and scalability across multiple devices or ADOMs.
Options A, B, and D are incorrect because:
* Asuggests optional or required settings, which do not apply to metadata variables.
* Bimplies they are available across all ADOMs by default, which is not always the case.
* Dstates they cannot be created in the global database ADOM, but metadata variables are typically managed within ADOMs and can be utilized globally based on specific configurations.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Using Metadata Variables and Script Management.
NEW QUESTION # 37
What must you consider before deciding to use FortiManager to manage a FortiAnalyzer device?
- A. Ensure that FortiAnalyzer features are installed in advance.
- B. Determine whether the VDOMs of the same FortiGate will be assigned to different ADOMs.
- C. Confirm that FortiManager has enough storage capacity for the expected logs.
- D. Check whether FortiManager is part of a high availability (HA) cluster.
Answer: A
Explanation:
When deciding to use FortiManager to manage a FortiAnalyzer device, you must ensure certain conditions are met so that the integration works seamlessly. One key aspect to consider is whether the necessary FortiAnalyzer features are enabled on FortiManager.
Explanation of Options:
* A. Confirm that FortiManager has enough storage capacity for the expected logs.
* This isfalse. FortiManager is not primarily responsible for storing logs. Logs are stored on the FortiAnalyzer device, and FortiManager's role is more focused on managing configuration, policies, and pushing updates, not on handling large volumes of logs.
* B. Ensure that FortiAnalyzer features are installed in advance.
* This istrue. Before using FortiManager to manage a FortiAnalyzer device, you must ensure that the necessaryFortiAnalyzer featuresare properly installed and enabled on FortiManager. FortiAnalyzer's reporting and logging functions must be correctly integrated for FortiManager to manage it effectively.
* C. Check whether FortiManager is part of a high availability (HA) cluster.
* This isfalse. While HA is important for redundancy, it is not a prerequisite for managing FortiAnalyzer with FortiManager. The HA status of FortiManager does not directly affect its ability to manage a FortiAnalyzer device.
* D. Determine whether the VDOMs of the same FortiGate will be assigned to different ADOMs.
* This isfalse. VDOMs (Virtual Domains) and ADOMs (Administrative Domains) relate to the management of FortiGate devices and the segregation of administrative access within FortiManager. This is unrelated to the management of a FortiAnalyzer device.
NEW QUESTION # 38
An administrator hasenabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?
- A. It allows administrative access to FortiManager.
- B. It allows third-party applications to gain read/write access to FortiManager.
- C. It allows FortiManager to determine the connection status of managed devices.
- D. It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices.
Answer: D
NEW QUESTION # 39
Exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. The FortiManager ADOM workspace mode is set to Normal
- B. An administrator can also lock the Local-FortiGate_root policy package.
- C. FortiManager is in workflow mode.
- D. The FortiManager ADOM is locked by the administrator.
Answer: B,C
NEW QUESTION # 40
......
FCP_FMG_AD-7.4 Braindumps PDF, Fortinet FCP_FMG_AD-7.4 Exam Cram: https://www.realexamfree.com/FCP_FMG_AD-7.4-real-exam-dumps.html
New 2024 FCP_FMG_AD-7.4 Sample Questions Reliable FCP_FMG_AD-7.4 Test Engine: https://drive.google.com/open?id=1tDTq4zvWfv9icZv_DlP_jDcVtazgEAh_
