Get Ready to Pass the 300-635 exam Right Now Using Our Cisco Certified DevNet Professional Exam Package
Enhance Your Career With Available Preparation Guide for 300-635 Exam
NEW QUESTION # 15
Refer to the exhibit:
Refer to the exhibit: Which Ansible module is need in line 8 to create a new VLAN 10 on the hosts defined in the "ucs" group?
- A. vlans
- B. nxos_vlans
- C. ucs_vlans
- D. vlan
Answer: C
Explanation:
Reference:
https://docs.ansible.com/ansible/latest/modules/ucs_vlans_module.html
NEW QUESTION # 16
Drag and drop the code to complete an Ansible playbook that creates a new tenant. Not all options are used.
Answer:
Explanation:
* aci_tenant
* tenant : MyCompany
* state: present
NEW QUESTION # 17
Refer to the exhibit.
Which action does the execution of this ACI Cobra Python code perform?
- A. It prints all endpoint MAC and IP addresses.
- B. It prints all APIC MAC and IP addresses.
- C. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses.
- D. It prints all LLDP neighbor MAC and IP addresses.
Answer: A
Explanation:
Section: Controller Based Data Center Networking
NEW QUESTION # 18
Which statement about synchronous and asynchronous API calls is true?
- A. Synchronous communication is harder to follow and troubleshoot
- B. Synchronous API calls wait to return until a response has been received.
- C. Asynchronous communication uses more overhead for client authentication.
- D. Synchronous API calls must always use a proxy server
Answer: C
NEW QUESTION # 19
Which procedure accesses the REST API browser within Cisco UCS Director?
- A. Send an HTTP GET request to https://[UCS Director IP]/api/get_resources/
- B. Log in as the user REST/user to access the REST API interface.
- C. Select the API browser from the Cisco UCS Director End User Portal catalog of services
- D. Enable the Developer menu Select Orchestration in the Ul, then select the REST API browser
Answer: D
Explanation:
To access the REST API browser within Cisco UCS Director, one must enable the Developer menu from the Cisco UCS Director interface. After enabling this option, select 'Orchestration' and then choose 'REST API Browser'. This allows users to interact with the various APIs provided by Cisco UCS Director for automation and orchestration purposes. References: Cisco UCS Director REST API Guide
NEW QUESTION # 20
What are two differences between SNMP and model-driven telemetry? (Choose two.)
- A. SNMP uses a continuous stream model.
- B. SNMP uses a pull model.
- C. Model-driven telemetry uses a push model.
- D. SNMP uses a push model.
- E. Model-driven telemetry uses a pull model.
Answer: B,C
NEW QUESTION # 21
A co-worker is using Cisco Intersight to determine the maximum available memory per server for their company's data center. Drag and drop the code to complete the Cisco Intersight API call that provides the desired results. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 22
Which two components are attributes of an ACI MIT managed object? (Choose two.)
- A. NI
- B. URL
- C. mo
- D. RN
- E. DN
Answer: A,C
NEW QUESTION # 23
When a switch boots it does not find its startup-config file. Drag and drop the steps that Power-On Auto Provisioning goes through to configure the switch for remote management from the left into the correct order on the right Not all options are used.
Answer:
Explanation:
NEW QUESTION # 24
Refer to the exhibit.
Refer to the exhibit. How often is the subscription stream for sys/bgp going to be sent?
- A. 5 msec
- B. 5 sec
- C. 5000 sec
- D. 5 min
Answer: D
NEW QUESTION # 25
Refer to the exhibit.
Assuming a new ACI instance, what is the result when this script is run?
- A. Ten objects are created and subsequently deleted.
- B. Nine objects are created.
- C. An exception is thrown.
- D. Ten objects are created.
Answer: D
NEW QUESTION # 26
Refer to the exhibit.
Refer to the exhibit. How often is the subscription stream for sys/bgp going to be sent?
- A. 5 msec
- B. 5 min
- C. 5 sec
- D. 5000 sec
Answer: C
NEW QUESTION # 27
Refer to the exhibit.
Which two statements are true about this API GET request to the ACI APIC? (Choose two.)
- A. The API call reads information from an object class
- B. The API response is encoded in JSON
- C. The API call reads information from a managed object.
- D. The API response is encoded in XML
- E. The API call creates a new 10G interface in the APIC
Answer: B,D
NEW QUESTION # 28
Refer to the exhibit.
The code should create a new tenant named Cisco via the Cobra SDK, which shows up after the execution of this script in the APIC dashboard.
Which code must he inserted into the red box to create this tenant?
- A. fvTenant = Tenant('Cisco')
- B. fvTenant = NewTenant(name='Cisco')
- C. tenant = Tenant(topMo. name='Cisco')
- D. fvTenant = Tenant(topMo, name='Cisco')
Answer: D
Explanation:
Section: Controller Based Data Center Networking
Explanation/Reference:
NEW QUESTION # 29
Which two capabilities apply to the DCNM API? (Choose two)
- A. DCNM requires a license to use the API
- B. All API operations can be performed using the DCNM GUI
- C. DCNM provides a REST-based API
- D. DCNM provides an XML-based SOAP API
- E. Some features of DCNM must be configured through the GUI
Answer: B,C
Explanation:
The DCNM API is REST-based, allowing third parties to test and develop application software. It supports a wide range of operations that can also be performed using the DCNM GUI, which uses these REST APIs to render the GUI itself. This means that the same tasks available through the API can be accessed and managed through the graphical user interface, providing flexibility in how network administrators interact with DCNM23.
References := Cisco DCNM REST API Guide, Cisco Community
NEW QUESTION # 30
Refer to the exhibit:
Refer to the exhibit. Which configuration change command must be run on the Cisco NX-OS device to make this command work?
- A. service bash-shell
- B. bash-shell enable
- C. enable bash-shell
- D. feature bash-shell
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/Bash.html#:~:text=NX%2DOS%20VSH.-,Accessing%20Bash,%2DOS%20network%2Dadmin%20role.&text=Bash%20is%20enabled%20by%20running,home%20directory%20for%20the%20user.
NEW QUESTION # 31
After a Cisco Nexus switch interface is enabled and in the up state, an engineer must automate the configuration of the interface descriptions using the EEM Python Module.
Drag and drop the steps the engineer must take from the left into the correct order on the right.
Answer:
Explanation:
Explanation
conf t
Event manager applet link monitor
Event syslog pattern "IF_UP"
Action 1 cli command "source cdp_description.py"
Exit
NEW QUESTION # 32
Which statement about SNMP support on Cisco Nexus switches is true?
- A. Only users belonging to the network operator RBAC role can assign SNMP groups.
- B. SNMP is not VRF-aware.
- C. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license.
- D. Cisco NX-OS supports one instance of the SNMP per VDC.
- E. Cisco NX-OS only supports SNMP over IPv4.
Answer: D
NEW QUESTION # 33
Instructions
To access multiple-choice questions, click on the numbered boxes on the left of the top pannel There are two multiple-choice questions with this task. Be sure to answer all two questions before selecting the Next button Scenario Review the exhibits and answer the multiple choice questions
A call from a SX20 in the BackBone (not shown) with a URI extension is dialing a HQ Ph 1 that is registered to the HQ CUCM. Determine if the call fails and if so, what are the two causes? (Choose two.)
- A. The Local Zone Match Rule state is disabled
- B. The call fails
- C. Rule name UCM2 is set to stop on Match
- D. The SIP port is incorrect on the Cisco Unified Communications Manager CUCM SIP trunk
- E. The call succeeds
- F. There are no issues, so the call succeeds
Answer: B,C
NEW QUESTION # 34
During the process of starting a Python network telemetry collector, which command starts the Cisco bigmuddy-network-telemetry-collector from GitHub?
- A. telemetry_receiver.py --ip-address <addr> --port <port>
- B. streaming telemetry
- C. telemetry_receiver.py --destination <port> --url <url>
- D. model driven telemetry
Answer: A
NEW QUESTION # 35
Refer to the exhibit
Which action does the execution of this ACI Cobra Python code perform?
- A. It prints all endpoint MAC and IP addresses
- B. It prints all APIC MAC and IP addresses
- C. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses
- D. It prints all LLDP neighbor MAC and IP addresses
Answer: A
NEW QUESTION # 36
Refer to the exhibit
Which action does the execution of this ACI Cobra Python code perform?
- A. It prints all endpoint MAC and IP addresses
- B. It prints all APIC MAC and IP addresses
- C. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses
- D. It prints all LLDP neighbor MAC and IP addresses
Answer: A
Explanation:
The ACI Cobra SDK is a Python library provided by Cisco for interacting with the Application Centric Infrastructure (ACI). The code in the image uses this SDK to log into an APIC controller, which is the central management entity for the ACI fabric. After logging in, it creates a class query for 'fvCEp', which stands for Fabric Endpoint. This class contains information about endpoints within the ACI fabric, including their MAC and IP addresses.
The 'subtree' property set to 'full' indicates that the query will return all objects within this class's subtree, meaning it will retrieve detailed information about each endpoint. The mo_dir.query(cq) method executes this query against the APIC.
Finally, for each object returned by the query (each endpoint), it prints out two attributes: 'mac' and 'ip'.
These attributes correspond to the MAC address and IP address of each endpoint in the ACI fabric. Therefore, option C is correct as this code prints all endpoint MAC and IP addresses.
References:
* Implementing Automation for Cisco Data Center Solutions (DCAUI)
* Cisco Learning Network - Data Center Training Videos
NEW QUESTION # 37
......
Get Special Discount Offer of 300-635 Certification Exam Sample Questions and Answers: https://www.realexamfree.com/300-635-real-exam-dumps.html
New 300-635 Dumps For Preparing Cisco Certified DevNet Professional Certified Cisco Exam Well: https://drive.google.com/open?id=1ucpu4X5T7kANavsosL1_nXmdywf9dYld
