Get Ready to Boost your Prepare for your NS0-176 Exam with 141 Questions
Use Free NS0-176 Exam Questions that Stimulates Actual EXAM
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
NetApp NS0-176 Exam Certification Details:
| Passing Score | 68% |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Exam Code | NS0-176 FlexPod |
NEW QUESTION 38
You are asked to configure the computer resources in a FlexPod solution to ensure that jumbo frames are configured end-to-end.
Which three actions must you perform to accomplish this task? (Choose three.)
- A. Configure jumbo frames on the switch VLANs.
- B. Enable jumbo frames on the operating system adapter.
- C. Configure a UCS QoS System Class with the jumbo frames.
- D. Set the MTU size to 1500 on the vNIC template
- E. Enable jumbo frames on all of the switches between the initiator and the iSCI target.
Answer: B,C,E
NEW QUESTION 39
Exhibit:
Referring to the exhibit, what do the asterisks on the left indicate about the output of the ~show zoneset active~ command?
- A. The device is not currently logged in.
- B. Only a single path is present.
- C. A redundant path is present.
- D. The device is currently logged in.
Answer: D
NEW QUESTION 40
An administrator is trying to present an NFS datastore to an ESXi host.
Which two must be available before mounting? (Choose two.)
- A. export policy access
- B. junction path case sensitivity
- C. datastore name case sensitivity
- D. host name case sensitivity
Answer: A,D
NEW QUESTION 41
Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two)
- A. Ports are primarily used for management traffic, but can be used for data traffic as well
- B. Ports can only run as a port channel
- C. Ports can run as a port channel or as individual links
- D. Ports can only run as individual links
- E. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
- F. Fabric Interconnect ports L1 and L2 are 10 Gb links
Answer: B,E
NEW QUESTION 42
Which two NetApp storage solutions are supported in FlexPod solutions? (Choose two.)
- A. NetApp AFF
- B. NetApp E-Series
- C. NetApp Storage GRID
- D. ONTAP Select
Answer: A,B
NEW QUESTION 43
A customer with several large Cisco MDS 9718 switches wants to reduce the number of total zones and the number of commands required to add devices, while still adhering to best practices.
In this scenario, which two configurations should be implemented? (Choose two.)
- A. Use the zone convert command to migrate existing zones.
- B. Use the zone copy command to migrate existing zones.
- C. Disable SMART Zoning for new VSANs.
- D. Enable SMART Zoning for new VSANs.
Answer: A,D
NEW QUESTION 44
Which backup type stores Service Profile information as a small editable file?
- A. Logical Configuration
- B. All Configurations
- C. Full Backup
- D. System Configuration
Answer: A
NEW QUESTION 45
How many VEMs can one server have?
- A. 0
- B. 1
- C. unlimited
- D. 2
Answer: A
NEW QUESTION 46
Which two are characteristics of a Fibre Channel SAN data LIF? (Choose two.)
- A. It can be associated with an interface group (ifgrp).
- B. It can be associated with an Ethernet port or VLAN interface.
- C. It can be associated with a WWPN.
- D. It is associated with the management LIF.
- E. It can be associated with a Fibre Channel port.
- F. It is associated with the administrative Vserver.
- G. It can be associated with an IP address.
Answer: C,E
NEW QUESTION 47
An administrator has a FlexPod solution with VMware vSphere. The administrator is migrating all network traffic from standard switches to vSphere distributed switches.
Virtual machines (VMs) are currently using VM port groups called VLAN_500 and VLAN_501 on standard virtual switch vSwitch3. A new distributed switch called dvSwitch_VM is created and new distributed port groups are configured for each VM traffic VLAN. VMs are configured to use the new port groups.
After the change, VMs on VLAN 501 report a loss of network connectivity; however, VMs on VLAN 500 are not showing any connectivity issues. The symptoms are experienced for VMs on all ESXi hosts.
Which action must the administrator perform to solve the problem?
- A. Add the correct VLAN ID to the new distributed port group for VLAN 501.
- B. Configure the dvSwitch_VM port binding to Ephemeral.
- C. Reboot the virtual machines to re-establish network connectivity.
- D. Create a new vmkernel port on dvSwitch_VM for VLAN 501.
Answer: B
NEW QUESTION 48
Where are log files located on a NetApp node?
- A. /mroot/etc/log/mlog/
- B. /etc/mlog/
- C. /log/core/
- D. /mroot/etc/crash/
- E. /letc/log/crash
Answer: A
NEW QUESTION 49
Which server role is required to support running virtual machines on a Microsoft based hypervisor?
- A. Hyper-V
- B. Application Server
- C. Web Server
- D. Remote Access
Answer: A
NEW QUESTION 50
You installed a new NetApp cluster running clustered Data ONTAP. There is a single Storage Virtual Machine (SVM) named esx1 on the cluster.
A volume named esx_datastore1 is created in the SVM esx1. The name of the root volume for the esx1 SVM is esx1_rootvol. The default export policy was applied to the volume esx1_rootvol.
You verified that the export policy applied to esx_datastore1 contains a single rule that allows all clients to mount the volume as read/write using any version of NFS. A Linux client attempts to NFS mount the volume and receives a Permission Denied error.
In this scenario, what caused this error?
- A. NFS has not been configured on the SVM esx1.
- B. The default export-policy does not have at least one rule to allow all clients read-only access.
- C. UNIX permissions for the volume esx1_rootvol are not set to read/write.
- D. The volume esx_datastore1 has not been mounted into the namespace of the esx1 SVM.
Answer: B
NEW QUESTION 51
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
- A. OnCommand Insight
- B. UCS Director
- C. UCS Manager
- D. OnCommand System Manager
Answer: B
NEW QUESTION 52
Which three management tools would you use to configure the NetApp storage component in a FlexPod Datacenter solution? (Choose three.)
- A. NetApp OnCommand System Manager
- B. Cisco UCS Central
- C. NetApp OnCommand Perfromance Manager
- D. Cisco UCS Director
- E. NetApp Virtual Storage Console (VSC) for VMware Sphere
Answer: A,B,E
NEW QUESTION 53
Which three actions are required to configure two Cisco Nexus switches as vPC peers? (Choose three.)
- A. Modify the network QoS policy.
- B. Enable the vPC feature.
- C. Create a peer link between switches.
- D. Configure different vPC domain IDs for each switch.
- E. Configure matching vPC domain IDs.
Answer: A,C,E
NEW QUESTION 54
There are 2 chassis tied to a pair of Fabric Interconnects.
First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links.
Which statement is true?
- A. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
- B. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
- C. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
- D. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
Answer: C
NEW QUESTION 55
A customer wants a newly deployed UCS C-Series server's fans to run at the minimum speed required to keep the server cool. The customer is also complaining that the server fans are making too much noise.
In this scenario, which type of fan speed should you select under the Power Control Policy of UCSM?
- A. Max Power
- B. Balanced
- C. Low Power
- D. Performance
Answer: B
NEW QUESTION 56
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Normal
- B. Edge
- C. Edge trunk
- D. Trunk
- E. Network
Answer: C
NEW QUESTION 57
While working on a performance related issue on your FlexPod solution, you notice an unequal distribution of traffic over the physical interfaces of a four port vPC between two Nexus 5000 switches. You would prefer a more even traffic distribution.
Which command would you use to accomplish this task?
- A. ~lacp system-priority~
- B. ~lacp rate fast~
- C. ~port-channel load-balance ethernet~
- D. ~hardware multicast hw-hash~
Answer: C
NEW QUESTION 58
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Thick Provision Eager Zeroed
- B. Thick Provision Lazy Zeroed
- C. Thin Provision
- D. Full Provision
Answer: A
NEW QUESTION 59
On a NetApp clustered Data ONTAP cluster, a volume named datastorel resides on an aggregate named node1 aggr1 and is mounted into the namespace at the junction path /esx cluster1/ds1.
A VMware virtual machine file named myhost.vmdk is at the root of the volume datastorel. A volume move operation relocates the datastorel volume to an aggregate named node3 aggr1.
In this scenario, what is the full path to the file myhost.vmdk after the volume move is complete?
- A. node3_aggr3/esx_cluster1/ds1/myhost.vmdk
- B. /esx_cluster1/datastore1/myhost.vmdk
- C. /esx_cluster1/ds1/myhost.vmdk
- D. /vo1/esx_cluster1/ds1/myhost.vmdk
Answer: C
NEW QUESTION 60
Your company has acquired a new NetApp EF600 storage array with a 25 Gbps HIC.
In this scenario, which FlexPod-supported protocol should be used to connect to this array?
- A. NFS
- B. FC
- C. iSCSI
- D. SMB
Answer: C
NEW QUESTION 61
How many ACTIVE SPAN sessions exist on a Fabric Interconnect?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B
NEW QUESTION 62
......
BEST Verified Network Appliance NS0-176 Exam Questions (2023) : https://www.realexamfree.com/NS0-176-real-exam-dumps.html
Get 100% Real NS0-176 Free Online Practice Test: https://drive.google.com/open?id=1qezDqHvutDxGJNFkhDD-gY-5wJUJbAw7
