Enhance Your Career With Available Preparation Guide for C_S4TM_2020 Exam
Get Special Discount Offer of C_S4TM_2020 Certification Exam Sample Questions and Answers
To become a SAP Certified Application Associate in Transportation Management, you must pass the C-S4TM-2020 certification exam. C_S4TM_2020 exam consists of 80 multiple-choice questions that you must complete in 180 minutes. C_S4TM_2020 exam is available in English, Japanese, and Chinese, and you can take it at any SAP testing center or online. The passing score for the exam is 64%, and you can retake the exam up to three times within a year.
NEW QUESTION # 75
You add an assessorial charge to a freight order after the freight settlement document (FSD) has been transferred and accruals have been posted in SAP ERR The background report to create FSDs determines the change strategy 'Reverse and Repost with new FSD1 for this freight order.
What will you see in SAP TM and SAP ERP?
There are 2 correct answers to this question.
- A. 3 Service entry sheets in SAP ERP
- B. 2 Service entry sheets in SAP ERP
- C. 2 FSDs and a Credit memo in SAP TM
- D. 2 FSDs in SAP TM
Answer: B,C
NEW QUESTION # 76
You add an assessorial charge to a freight order after the freight settlement document (FSD) has been posted and accruals have been booked in SAP Materials Management. The background report to create FSDs determines change strategy "Reverse and Repost with new FSD" for this freight order. What will you see in SAP Transportation Management and SAP Materials Management? Note: There are 2 correct Answers to this question.
- A. 2 FSDs and 1 credit memo in SAP Transportation Management
- B. 3 service entry sheets in SAP Materials Management
- C. 1 purchase order in SAP Materials Management
- D. 3 FSDs in SAP Transportation Management
Answer: A,D
NEW QUESTION # 77
On the Document Flow tab, check whether a freight unit was created?
There are 2 correct answers to this question.
Response:
- A. Verify that a freight unit has been created.
- B. Open the Document Flow tab.
- C. Optimize resource planning, scheduling, and allocation to boost service profitability
- D. Adjust workforce schedules on the fly to keep up with changes in demand
Answer: A,B
NEW QUESTION # 78
You are not able to create a service entry sheet (SES) in SAP ERP from a freight settlement document. Which of the following element should you check in SAP ERP to identify the error?
- A. Post processing framework (PPF) Message log
- B. InboundIDoc settings
- C. XML inbound messages
- D. Agency billing settings
Answer: B
NEW QUESTION # 79
In which of the following areas can you use incompatibilities? Note: There are 3 correct Answers to this question.
- A. Charge calculation
- B. Freight unit building
- C. Tendering
- D. Carrier selection
- E. Delivery proposal
Answer: A,B,D
NEW QUESTION # 80
Master data can only be created directly in SAP TM. determine whether this statement is true or false.
- A. false
- B. true
Answer: A
NEW QUESTION # 81
Which of the following profiles is directly assigned to an organizational unit?
- A. Calculation profile
- B. Charges profile
- C. Settlement profile
- D. Distribution profile
Answer: B
NEW QUESTION # 82
You are implementing a side-by-side scenario integrating sales orders and outbound deliveries to SAP Transportation Management. Sales order integration has created 30 freight units for 1 sales order (1 freight unit per sales order item). During planning, the freight units have been assigned to 3 trucks (10 freight units on each truck). Based on this planning result, delivery creation is triggered. During packaging, up to 3 items can be packed into 1 case. What is the minimum number of freight units that exist in SAP Transportation Management at the end of this process?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 83
How to Review the item data?
There are 2 correct answers to this question.
- A. Provide high quality work by the most qualified people, at convenient times for customers
- B. On the Items tab, scroll to the right to review the assigned requirement.
- C. Select the item and review the product details.
- D. Improve customer satisfaction and consistently meet service-level agreements (SLAs)
Answer: B,C
NEW QUESTION # 84
What is created automatically in SAP TM and assigned to the location? Please choose the correct answer.
- A. Dashboards and cockpits.
- B. Material flow overviews.
- C. Business partner.
- D. User-dependent information.
Answer: C
NEW QUESTION # 85
What is a logical or physical place in which resources are managed on a quantity basis? Please choose the correct answer.
- A. SAP ERP integration
- B. A location
- C. Leverage seamless
- D. Ultimate goal
Answer: B
NEW QUESTION # 86
Which of the following are attributes of trade lanes? Note: There are 2 correct Answers to this question.
- A. Transportation mode
- B. Means of transport
- C. Transportation group
- D. Dangerous goods indicator
Answer: A,B
NEW QUESTION # 87
Which SAP ERP master data elements can be transferred to SAP TM? There are 3 correct answers to this question.
- A. Supply Area
- B. Shipping Point
- C. Customer
- D. Material
Answer: B,C,D
NEW QUESTION # 88
Which item category in a forwarding order item hierarchy does NOT influence planning?
- A. Product
- B. Passive vehicle
- C. Container
- D. Service
Answer: D
NEW QUESTION # 89
What is initiated from SAP ERP as a shipper needs to perform shipping activities with the SAP TM system? Please choose the correct answer.
- A. AP EWM using
- B. Deliveries that are sent
- C. You can integrate SAP TM
- D. Order integration
Answer: D
NEW QUESTION # 90
Which of the following actions can be triggered from the transportation cockpit?
Note: There are 2 correct answers to this question.
- A. Remove a resource from a freight order
- B. Apply a default route to a freight unit
- C. Create a freight settlement document
- D. Define the capacity of a truck
Answer: B,C
NEW QUESTION # 91
In which object can you track and trace the whole journey of your goods?
- A. Freight order
- B. Forwarding order
- C. Freight booking
- D. Freight unit
Answer: D
NEW QUESTION # 92
Which settings can be maintained in the transportation requirement type Customizing?
There are 2 correct answers to this question.
- A. Charge Calculation Profile
- B. Planning based on requested or confirmed quantities
- C. Freight Unit Building Rules
Answer: B,C
NEW QUESTION # 93
Which of the following are standard integration scenarios between SAP ERP and SAP TM?
There are 3 correct answers to this question. .
- A. SAP ERP stock transport order with SAP TM order-based transportation requirement
- B. SAP TM forwarding settlement document with SAP ERP billing document
- C. SAP TM forwarding settlement document with SAP ERP purchase order
- D. SAP ERP shipment with SAP TM freight order
- E. SAP TM freight order with SAP ERP purchase order
Answer: A,C,D
NEW QUESTION # 94
Based on your company policy, the hazardous product POISON should NOT be transported on means of transport TRUCK unless authorized by user A.
How can you maintain the system reaction in the corresponding incompatibility definition used by user A? Note: There are 2 correct Answers to this question.
- A. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Warning If Incompatibility Is Violated
- B. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Incompatibility Is Ignored
- C. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Incompatibility Must Not Be Violated
- D. Automatic Violation: Incompatibility Is Ignored. Manual Violation: Warning If Incompatibility Is Violated
Answer: A,C
NEW QUESTION # 95
You want to set up charge calculation for freight orders. Valid charges should consist of a based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each freight order, and the charge is based on the container type can be small, medium or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 96
Which of the following can you define for a means of transport?
There are 3 correct answers to this question.
- A. Low speed
- B. Transportation mode
- C. GIS quality
- D. Factory calendar
- E. Capacity
Answer: A,B,C
NEW QUESTION # 97
You are assigning organization A to a freight order. Which of the following organizational unit functions can you assign to organization A to accomplish this?
There are 2 correct answers to this question.
- A. Purchasing Organization
- B. Company
- C. Forwarding House
- D. Sales Organization
Answer: A,B
NEW QUESTION # 98
You are implementing SAP S/4HANA Supply Chain for Transportation Management. What can be direct predecessor documents for a freight order? Note: There are 2 correct answers to this question.
- A. Sales Order
- B. Freight Unit
- C. Shipment
- D. Order-based Transportation Requirement
Answer: A,B
NEW QUESTION # 99
What are some of the parameters that you can define in the forwarding order type?
Note: There are 3 correct answers to this question.
- A. Shipping type
- B. Export forwarding order type
- C. Planning profile
- D. Bill of lading type
- E. Dangerous goods profile
Answer: A,B,D
NEW QUESTION # 100
......
SAP C_S4TM_2020 Certification Exam consists of 80 multiple-choice questions and is available in English, Japanese, Korean, and Simplified Chinese. The duration of the exam is 180 minutes, and candidates must score at least 63% to pass. C_S4TM_2020 exam fee is USD 550, and it can be taken at any SAP exam center or online.
Updated C_S4TM_2020 Dumps Questions Are Available For Passing SAP Exam: https://www.realexamfree.com/C_S4TM_2020-real-exam-dumps.html
New C_S4TM_2020 Dumps For Preparing SAP Certified Application Associate Certified SAP Exam Well: https://drive.google.com/open?id=1bHzwLPf4LdFG_a6Yyq28QN470godBbhd
