2024 Realistic 500-220 100% Pass Guaranteed Download Exam Q&A
Accurate 500-220 Answers 365 Days Free Updates
NEW QUESTION # 39
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
- B. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
- C. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
- D. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
Answer: A
NEW QUESTION # 40
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will be load-balanced between both active WAN links.
- B. WebEx traffic will prefer WAN 2 as long as it is up.
- C. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- D. WebEx traffic will prefer WAN 1 as it is the primary uplink.
Answer: D
NEW QUESTION # 41
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
- B. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
- C. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
- D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
Answer: A
Explanation:
Explanation
The performance probe is a small payload (approximately 100 bytes) of UDP data sent over all established VPN tunnels every 1 second. MX appliances track the rate of successful responses and the time that elapses before receiving a response. This data allows the MX to determine the packet loss, latency, and jitter over each VPN tunnel in order to make the necessary performance-based decisions.
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best
NEW QUESTION # 42
Refer to the exhibit.
Which design recommendation should be considered?
- A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- B. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- C. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
Answer: B
NEW QUESTION # 43
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring the preserved event number to maximize logging.
- B. Configuring Dashboard logging to preserve only certain event types.
- C. Configuring a syslog server for the network.
- D. Configuring the preserved event period to unlimited.
Answer: C
Explanation:
Explanation
Configuring a syslog server for the network is the Cisco Meraki best practice method to preserve complete historical network event logs. A syslog server can be configured to store messages for reporting purposes from MX Security Appliances, MR Access Points, and MS switches1. The syslog server can collect various types of events, such as VPN connectivity, uplink connectivity, DHCP leases, firewall rules, IDS alerts, and security events2. The syslog server can also help with troubleshooting and monitoring the network performance and security.
NEW QUESTION # 44
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
Explanation
Table Description automatically generated with medium confidence
NEW QUESTION # 45
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. POST
- B. GET
- C. PATCH
- D. PUT
- E. SET
- F. ADD
Answer: A,B,D
Explanation:
Explanation
Verbs in the API follow the usual REST conventions:
GET returns the value of a resource or a list of resources, depending on whether an identifier is specified.
POST adds a new resource
PUT updates a resource
DELETE removes a resource
https://documentation.meraki.com/General_Administration/Other_Topics/Cisco_Meraki_Dashboard_API
NEW QUESTION # 46
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. detection
- B. blocking
- C. prevention
- D. quarantine
Answer: C
Explanation:
Explanation
You can enable intrusion prevention by setting the Mode drop-down to Prevention under Security & SD-WAN
> Configure > Threat protection > Intrusion detection and prevention. Traffic will be automatically blocked by best effort if it is detected as malicious based on the detection ruleset specified above.
https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Threat_Protection
NEW QUESTION # 47
Which information do the MXs in a High Availability pair share?
- A. spanning-tree state
- B. stateful firewall database
- C. time synchronization state
- D. DHCP association database
Answer: A
NEW QUESTION # 48
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Splash page
- B. Wireless > Configure > Firewall & Traffic Shaping
- C. Wireless > Configure > Access Control
- D. Wireless > Configure > SSIDs
Answer: C
Explanation:
Explanation
SM Sentry enrollment can be enabled on any MR network via the Splash page section of the Wireless > Configure > Access control page.
https://documentation.meraki.com/MR/MR_Splash_Page/Systems_Manager_Sentry_Enrollment
NEW QUESTION # 49
Which information is used to calculate whether a WAN link has high usage?
- A. total number of devices that are actively passing traffic
- B. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
- C. total historical throughput of an uplink
- D. data under Security & SD WAN > Appliance Status > Uplink > Live Data
Answer: B
Explanation:
Explanation
Which information is used to calculate whether a WAN link has high usage not how to view (To accurately identify high utilization, users must set the ISP-provided bandwidth limits under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Configuration for each uplink. If the bandwidth usage is higher than
80% of the defined limit, it will mark that uplink as High Usage.)
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=To%20accurately%20identify%20high%20util
NEW QUESTION # 50
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 51
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Selective wipe
- B. Send notification
- C. Remote Desktop
- D. OS updates
- E. Screenshot
Answer: C,E
Explanation:
Explanation
https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems_Manager - Under Live Tools Selective Wiping is only for MacOS. Here we have Windows Laptop as well
NEW QUESTION # 52
What is a feature of distributed Layer 3 roaming?
- A. An MX Security Appliance is not required as a concentrator.
- B. An MX Security Appliance is required as a concentrator.
- C. All wireless client traffic can be split-tunneled.
- D. All wireless client traffic is tunneled.
Answer: A
Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best This is a feature of distributed Layer 3 roaming, which maintains layer 3 connections for end devices as they roam across layer 3 boundaries without a concentrator1. The first access point that a device connects to will become the anchor access point1.
NEW QUESTION # 53
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The more restrictive configuration is preferred.
- B. The configuration change in the bound network overrides the template configuration.
- C. The configuration change in the bound network is combined with the template configuration inside the template.
- D. The template configuration overrides the configuration change in the bound network.
Answer: C
Explanation:
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
NEW QUESTION # 54
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #2 had better application performance than Network #1.
- B. Network #2 could not load Google because of a local client misconfiguration.
- C. Network #1 could not load Google because of a remote server issue.
- D. Neither network recorded any server-side performance issues.
- E. Users on both networks may be experiencing issues when attempting to reach Google.
Answer: D,E
NEW QUESTION # 55
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will be load-balanced between both active WAN links.
- B. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- D. WebEx traffic will prefer WAN 2 as long as it is up.
Answer: B
Explanation:
Explanation
Assuming this MX has established a full tunnel with its VPN peer, the MX will route the WebEx traffic based on the SD-WAN policy configured in the exhibit. The SD-WAN policy has two performance classes: Conf and Default. The Conf performance class matches the traffic with destination port 9000, which is used by WebEx for VoIP and video RTP3. The Conf performance class has a preferred uplink of WAN 2 and a failover uplink of WAN 1. It also has thresholds for latency, jitter, and loss that determine when to switch from the preferred uplink to the failover uplink. Therefore, the WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the Conf performance class. If WAN 2 exceeds the thresholds or goes down, the WebEx traffic will switch to WAN 1 as the failover uplink.
NEW QUESTION # 56 
Refer to the exhibit. What Is the ratio of internet-bound flows that route via WAN 1 compared with WAN 2?
- A. All flows alternate in a 2:1 ratio.
- B. All flows agrees via WAN 1:1 ratio.
- C. All flows alternate in a 5:1 ratio.
- D. All flows egress via WAN1.
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Prefere
NEW QUESTION # 57
Drag and drop the settings from the left onto the OS system or systems that support it on the right Settings can be used more than once.
Answer:
Explanation:
Explanation
IOS:
Kiosk mode
Single App mode
Wallpaper
Cisco Security Connector
Active Sync
Android:
Kiosk mode
Backpack
Wallpaper
Active Sync
This question is related to the topic of in the Cisco Meraki documentation.
You can find more information about this topic in the [System Manager: Getting Started] article or the
[System Manager Overview] page.
https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings_Payloads
NEW QUESTION # 58
Refer to the exhibit.
Which design recommendation should be considered?
- A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- B. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- C. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide There will be a throughput reduction (~50% reduction) with each "hop" in a mesh. It is recommended that a mesh network be designed for no more than one mesh hop from the gateway to client device.
NEW QUESTION # 59
What are two organization permission types? (Choose two.)
- A. Monitor-only
- B. Full
- C. Read-only
- D. Write-only
- E. Write
Answer: B,C
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION # 60
There will be 100 concurrent users streaming video to their laptops. A 30/70 split between 2.4 Ghz and 5 Ghz will be used. Roughly how many APs (rounded to the nearest whole number) are needed based on client count?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
This is the approximate number of APs that are needed based on client count, assuming that each AP can support up to 25 concurrent video streaming users. This can be calculated by using the formula:
Number of APs = (Number of Users x Percentage of Users on a Band) / Number of Users per AP on that Band Where Number of Users is 100, Percentage of Users on 2.4 Ghz is 30%, Percentage of Users on 5 Ghz is 70%, Number of Users per AP on 2.4 Ghz is 15, and Number of Users per AP on 5 Ghz is 30. Therefore, Number of APs = (100 x 0.3 / 15) + (100 x 0.7 / 30) Number of APs = (3.33) + (2.33) Number of APs = 5.66 Rounding to the nearest whole number, the number of APs is 4.
This question is related to the topic of Wireless Capacity Planning in the Cisco Meraki documentation. You can find more information about this topic in the [Wireless Capacity Planning] article or the [Best Practice Design - MR Wireless] page.
NEW QUESTION # 61
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs AMP for inter-VLAN traffic.
- B. The MX appliance performs IDS/IPS for inter-VLAN traffic.
- C. The MX appliance performs content filtering for inter-VLAN traffic.
- D. The MX appliance performs data encryption for inter-VLAN traffic.
Answer: D
NEW QUESTION # 62
......
500-220 dumps Exam Material with 74 Questions: https://www.realexamfree.com/500-220-real-exam-dumps.html
500-220 DUMPS Q&As with Explanations Verified & Correct Answers: https://drive.google.com/open?id=13Em1e4IhB9LnGAHxjDpsDxZXh-gKqg8L
