2021 Updated Verified 350-701 dumps Q&As - Pass Guarantee or Full Refund
350-701 PDF Questions and Testing Engine With 358 Questions
Difficulty in Attempting Implementing and Operating Cisco Security Core Technologies (SCOR 350-701)
Cisco offers several options on their website. Cisco provides classroom training through which Cisco’s authorised learning partners teach instructor-led classes all over the world. E-Learning solutions are provided be Cisco for exam preparation via selp-paced online courses. Students are highly encouraged to join Cisco’s Certification communinty where they can join students from all over the world and learn together. CISCO 350-701 practice tests and CISCO 350-701 practice exams are also a great way to prepare for this exam.
By using Certifications-Questions.com CISCO 350-701 dumps you can make terrific qualities that make certain to make your occupation brighter and open brand-new doors for success and possibility. You don’t have to seek for various other web sites and also waste time because you are in the right website currently. The exam product at RealExamFree is fully checked by our licensed experts that are committed and also loyal to serving you. The group of professionals filtered whatever so firmly that there is no chance of mistakes. We have a superb method of preparing each product for you. We have made use of the exam information in the manufacturing of each item. All the important things utilized in our items are easy to use, so everybody can conveniently recognize them.
How to Prepare for Implementing and Operating Cisco Security Core Technologies (SCOR 350-701)
Preparation Guide for Implementing and Operating Cisco Security Core Technologies (SCOR 350-701)
Introduction for Implementing and Operating Cisco Security Core Technologies (SCOR 350-701)
Implementing Cisco Enterprise Network Core Technologies v1.0 (ENCOR 350-701) is a 120-minute exam associated with the CCNP and CCIE Enterprise Certifications. tests a candidate’s knowledge of implementing and operating core security technologies including network security, cloud security, content security, endpoint protection and detection, secure network access, visibility and enforcements for which contents of CISCO 350-701 practice exam and CISCO 350-701 practice tests have all the relevant content and information.
This exam tests your knowledge and skills related to implementing core enterprise network technologies, including:
- Network security
- Endpoint protection and detection
- Content security
- Secure network access
- Cloud security
Knowledge and skills you should have before attending this exam:
- Implementation of Enterprise LAN networks
- Basic understanding of Python scripting
- Basic understanding of Enterprise routing and wireless connectivity
NEW QUESTION 107
Which factor must be considered when choosing the on-premise solution over the cloud-based one?
- A. With a cloud-based solution, the provider is responsible for the installation, but the customer is responsible for the maintenance of the product.
- B. With an on-premise solution, the customer is responsible for the installation and maintenance of the
- C. With an on-premise solution, the provider is responsible for the installation and maintenance of the product, whereas with a cloud-based solution, the customer is responsible for it
- D. With an on-premise solution, the provider is responsible for the installation, but the customer is responsible for the maintenance of the product.
Answer: B
Explanation:
product, whereas with a cloud-based solution, the provider is responsible for it.
NEW QUESTION 108
Drag and drop the capabilities of Cisco Firepower versus Cisco AMP from the left into the appropriate category on the right.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/security/ngips/datasheet-c78-742472.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Refere
https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/advanced-malware-protection/solution-ov
NEW QUESTION 109
A network engineer has been tasked with adding a new medical device to the network. Cisco ISE is being used as the NAC server, and the new device does not have a supplicant available. What must be done in order to securely connect this device to the network?
- A. Use 802.1X with posture assessment.
- B. Use MAB with posture assessment.
- C. Use 802.1X with profiling.
- D. Use MAB with profiling
Answer: D
Explanation:
As the new device does not have a supplicant, we cannot use 802.1X.
MAC Authentication Bypass (MAB) is a fallback option for devices that don't support 802.1x. It is virtually always used in deployments in some way shape or form. MAB works by having the authenticator take the connecting device's MAC address and send it to the authentication server as its username and password. The authentication server will check its policies and send back an Access-Accept or Access-Reject just like it would with 802.1x.
Cisco ISE Profiling Services provides dynamic detection and classification of endpoints connected to the network. Using MAC addresses as the unique identifier, ISE collects various attributes for each network endpoint to build an internal endpoint database. The classification process matches the collected attributes to prebuilt or user-defined conditions, which are then correlated to an extensive library of profiles. These profiles include a wide range of device types, including mobile clients (iPads, Android tablets, Chromebooks, and so on), desktop operating systems (for example, Windows, Mac OS X, Linux, and others), and numerous non-user systems such as printers, phones, cameras, and game consoles.
Once classified, endpoints can be authorized to the network and granted access based on their profile. For example, endpoints that match the IP phone profile can be placed into a voice VLAN using MAC Authentication Bypass (MAB) as the authentication method. Another example is to provide differentiated network access to users based on the device used. For example, employees can get full access when accessing the network from their corporate workstation but be granted limited network access when accessing the network from their personal iPhone.
As the new device does not have a supplicant, we cannot use 802.1X.
MAC Authentication Bypass (MAB) is a fallback option for devices that don't support 802.1x. It is virtually always used in deployments in some way shape or form. MAB works by having the authenticator take the connecting device's MAC address and send it to the authentication server as its username and password. The authentication server will check its policies and send back an Access-Accept or Access-Reject just like it would with 802.1x.
Cisco ISE Profiling Services provides dynamic detection and classification of endpoints connected to the network. Using MAC addresses as the unique identifier, ISE collects various attributes for each network endpoint to build an internal endpoint database. The classification process matches the collected attributes to prebuilt or user-defined conditions, which are then correlated to an extensive library of profiles. These profiles include a wide range of device types, including mobile clients (iPads, Android tablets, Chromebooks, and so on), desktop operating systems (for example, Windows, Mac OS X, Linux, and others), and numerous non-user systems such as printers, phones, cameras, and game consoles.
Once classified, endpoints can be authorized to the network and granted access based on their profile. For example, endpoints that match the IP phone profile can be placed into a voice VLAN using MAC Authentication Bypass (MAB) as the authentication method. Another example is to provide differentiated network access to users based on the device used. For example, employees can get full access when accessing the network from their corporate workstation but be granted limited network access when accessing the network from their personal iPhone.
Reference:
As the new device does not have a supplicant, we cannot use 802.1X.
MAC Authentication Bypass (MAB) is a fallback option for devices that don't support 802.1x. It is virtually always used in deployments in some way shape or form. MAB works by having the authenticator take the connecting device's MAC address and send it to the authentication server as its username and password. The authentication server will check its policies and send back an Access-Accept or Access-Reject just like it would with 802.1x.
Cisco ISE Profiling Services provides dynamic detection and classification of endpoints connected to the network. Using MAC addresses as the unique identifier, ISE collects various attributes for each network endpoint to build an internal endpoint database. The classification process matches the collected attributes to prebuilt or user-defined conditions, which are then correlated to an extensive library of profiles. These profiles include a wide range of device types, including mobile clients (iPads, Android tablets, Chromebooks, and so on), desktop operating systems (for example, Windows, Mac OS X, Linux, and others), and numerous non-user systems such as printers, phones, cameras, and game consoles.
Once classified, endpoints can be authorized to the network and granted access based on their profile. For example, endpoints that match the IP phone profile can be placed into a voice VLAN using MAC Authentication Bypass (MAB) as the authentication method. Another example is to provide differentiated network access to users based on the device used. For example, employees can get full access when accessing the network from their corporate workstation but be granted limited network access when accessing the network from their personal iPhone.
NEW QUESTION 110
How does Cisco Stealthwatch Cloud provide security for cloud environments?
- A. It assigns Internet-based DNS protection for clients and servers.
- B. It delivers visibility and threat detection.
- C. It facilitates secure connectivity between public and private networks.
- D. It prevents exfiltration of sensitive data.
Answer: B
Explanation:
Explanation
Cisco Stealthwatch Cloud: Available as an SaaS product offer to provide visibility and threat detection within public cloud infrastructures such as Amazon Web Services (AWS), Microsoft Azure, and Google Cloud Platform (GCP).
NEW QUESTION 111
An administrator configures new authorization policies within Cisco ISE and has difficulty profiling the devices. Attributes for the new Cisco IP phones that are profiled based on the RADIUS authentication are seen however the attributes for CDP or DHCP are not. What should the administrator do to address this issue?
- A. Configure a service template within the switch to standardize the port configurations so that the correct information is sent to Cisco ISE
- B. Configure the device sensor feature within the switch to send the appropriate protocol information Explanation Device sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by Device Sensor can come from the following protocols: + Cisco Discovery Protocol (CDP) + Link Layer Discovery Protocol (LLDP) + Dynamic Host Configuration Protocol (DHCP) Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200292-ConfigureDevice-Sensor-for-ISE-Profilin.html
- C. Configure the ip dhcp snooping trust command on the DHCP interfaces to get the information to Cisco ISE
- D. Configure the authentication port-control auto feature within Cisco ISE to identify the devices that are trying to connect
Answer: B
Explanation:
Device sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by Device Sensor can come from the following protocols:
+ Cisco Discovery Protocol (CDP)
+ Link Layer Discovery Protocol (LLDP)
+ Dynamic Host Configuration Protocol (DHCP)
Explanation Device sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by Device Sensor can come from the following protocols: + Cisco Discovery Protocol (CDP) + Link Layer Discovery Protocol (LLDP) + Dynamic Host Configuration Protocol (DHCP) Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200292-ConfigureDevice-Sensor-for-ISE-Profilin.html
NEW QUESTION 112
An engineer has been tasked with configuring a Cisco FTD to analyze protocol fields and detect anomalies in the traffic from industrial systems. What must be done to meet these requirements?
- A. Implement pre-filter policies for the CIP preprocessor
- B. Enable traffic analysis in the Cisco FTD
- C. Modify the access control policy to trust the industrial traffic
- D. Configure intrusion rules for the DNP3 preprocessor
Answer: A
Explanation:
Explanation The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct. The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields. The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine. You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic. Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-configguide-v63/scada_preprocessors.html Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications. Note: + An intrusion rule is a specified set of keywords and arguments that the system uses to detect attempts to exploit vulnerabilities in your network. As the system analyzes network traffic, it compares packets against the conditions specified in each rule, and triggers the rule if the data packet meets all the conditions specified in the rule. + Preprocessor rules, which are rules associated with preprocessors and packet decoder detection options in the network analysis policy. Most preprocessor rules are disabled by default.
The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct.
The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields.
The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine.
You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic.
Reference:
Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications.
Note:
Explanation The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct. The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields. The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine. You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic. Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-configguide-v63/scada_preprocessors.html Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications. Note: + An intrusion rule is a specified set of keywords and arguments that the system uses to detect attempts to exploit vulnerabilities in your network. As the system analyzes network traffic, it compares packets against the conditions specified in each rule, and triggers the rule if the data packet meets all the conditions specified in the rule. + Preprocessor rules, which are rules associated with preprocessors and packet decoder detection options in the network analysis policy. Most preprocessor rules are disabled by default.
NEW QUESTION 113
A network engineer is trying to figure out whether FlexVPN or DMVPN would fit better in their environment. They have a requirement for more stringent security multiple security associations for the connections, more efficient VPN establishment as well consuming less bandwidth. Which solution would be best for this and why?
- A. DMVPN because it supports lKEv2 and FlexVPN does not.
- B. FlexVPN because it supports IKEv2 and DMVPN does not.
- C. FlexVPN because it uses multiple SAs and DMVPN does not.
- D. DMVPN because it uses multiple SAs and FlexVPN does not.
Answer: B
NEW QUESTION 114
Which two fields are defined in the NetFlow flow? {Choose two.)
- A. output logical interface
- B. destination port
- C. class of service bits
- D. type of service byte
- E. Layer 4 protocol type
Answer: B,D
Explanation:
Reference:
NEW QUESTION 115
With which components does a southbound API within a software-defined network architecture communicate?
- A. appliances
- B. controllers within the network
- C. applications
- D. devices such as routers and switches
Answer: D
Explanation:
The Southbound API is used to communicate between Controllers and network devices.
NEW QUESTION 116
Which Cisco platform ensures that machines that connect to organizational networks have the recommended antivirus definitions and patches to help prevent an organizational malware outbreak?
- A. Cisco ISE
- B. Cisco Prime Infrastructure
- C. Cisco WiSM
- D. Cisco ESA
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118188-qanda-esa-00.html
NEW QUESTION 117
How does Cisco Umbrella archive logs to an enterprise owned storage?
- A. by the system administrator downloading the logs from the Cisco Umbrella web portal
- B. by using the Application Programming Interface to fetch the logs
- C. by sending logs via syslog to an on-premises or cloud-based syslog server
- D. by being configured to send logs to a self-managed AWS S3 bucket
Answer: D
Explanation:
Explanation The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations' Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there's a minimum of delay between traffic from the organization's Umbrella dashboard being logged and then being available to download from an S3 bucket. By having your organizations' logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage. Reference: https://docs.umbrella.com/deployment-umbrella/docs/manage-logs The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations' Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there's a minimum of delay between traffic from the organization's Umbrella dashboard being logged and then being available to download from an S3 bucket.
By having your organizations' logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage.
Explanation The Cisco Umbrella Multi-Org console has the ability to upload, store, and archive traffic activity logs from your organizations' Umbrella dashboards to the cloud through Amazon S3. CSV formatted Umbrella logs are compressed (gzip) and uploaded every ten minutes so that there's a minimum of delay between traffic from the organization's Umbrella dashboard being logged and then being available to download from an S3 bucket. By having your organizations' logs uploaded to an S3 bucket, you can then download logs automatically to keep in perpetuity in backup storage. Reference: https://docs.umbrella.com/deployment-umbrella/docs/manage-logs
NEW QUESTION 118
What is a characteristic of a bridge group in ASA Firewall transparent mode?
- A. It has an IP address on its BVI interface and is used for management traffic
- B. It includes multiple interfaces and access rules between interfaces are customizable
- C. It allows ARP traffic with a single access rule
- D. It is a Layer 3 segment and includes one port and customizable access rules
Answer: B
Explanation:
Explanation Explanation A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place. Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported. You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-generalconfig/intro-fw.html Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.
Explanation
A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place.
Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported.
You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired.
Reference:
Explanation Explanation A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place. Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported. You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-generalconfig/intro-fw.html Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.
NEW QUESTION 119
A network engineer is trying to figure out whether FlexVPN or DMVPN would fit better in their environment.
They have a requirement for more stringent security multiple security associations for the connections, more efficient VPN establishment as well consuming less bandwidth. Which solution would be best for this and why?
- A. DMVPN because it supports IKEv2 and FlexVPN does not
- B. DMVPN because it uses multiple SAs and FlexVPN does not
- C. FlexVPN because it uses multiple SAs and DMVPN does not
- D. FlexVPN because it supports IKEv2 and DMVPN does not
Answer: C
Explanation:
Explanation
FlexVPN supports IKEv2 -> Answer A is not correct.
DMVPN supports both IKEv1 & IKEv2 -> Answer B is not correct.
FlexVPN support multiple SAs -> Answer D is not correct.
NEW QUESTION 120
Drag and drop the descriptions from the left onto the correct protocol versions on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 121
Which deployment model is the most secure when considering risks to cloud adoption?
- A. public cloud
- B. private cloud
- C. community cloud
- D. hybrid cloud
Answer: B
NEW QUESTION 122
Which Cisco security solution protects remote users against phishing attacks when they are not connected to the VPN?
- A. NGIPS
- B. Cisco Stealthwatch
- C. Cisco Firepower
- D. Cisco Umbrella
Answer: D
NEW QUESTION 123
......
Cisco SCOR 350-701 Practice Test Questions, Cisco SCOR 350-701 Exam Practice Test Questions
Cisco 350-701 SCOR: Implementing and Operating Cisco Security Core Technologies is a qualifying exam associated with three certifications, namely CCIE Security, CCNP Security, and Cisco Certified Specialist – Security Core.
Exam Engine for 350-701 Exam Free Demo & 365 Day Updates: https://www.realexamfree.com/350-701-real-exam-dumps.html
Test Engine to Practice Test for 350-701 Valid and Updated Dumps: https://drive.google.com/open?id=1NoGuO2YWAL0V6JSRD3EJ9_JaFPKiLlVT
